220-1201 Exam Dumps - CompTIA A+ Core 1 Exam (2025)

Upgrading to asolid-state drive (SSD)providesmore storage spaceandfaster read/write speeds, which resolves both the “insufficient storage” error and slow application loads.

Option B (USB):Not intended for permanent application storage or performance improvements.

Option C (HDD):Could solve storage capacity but would not improve speed.

Option D (RAM):Affects multitasking and memory-intensive tasks, not storage capacity directly.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.5: Given a scenario, troubleshoot problems related to storage devices.

Dynamic Host Configuration Protocol (DHCP) is a network service used to automatically assign IP addresses and other network configuration details (such as subnet masks and default gateways) to devices on an enterprise-wide network.

Why Not A (DNS): DNS resolves domain names to IP addresses but does not allocate IP addresses.

Why Not B (Syslog): Syslog is used for logging system events, not IP address management.

Why Not C (Telnet): Telnet is a protocol for remote access, not for IP allocation.

CompTIA A+ Exam Reference: Core 1 (220-1201), Section 2.6, DHCP concepts​.

A Trusted Platform Module (TPM) is a hardware chip used to enable encryption technologies such as BitLocker, providing secure key storage for system-wide encryption.

From CompTIA A+ 220-1101 Official Study Guide, Objective 3.5 – Security features:

“A TPM chip is required for system encryption, storing encryption keys securely on the hardware.”

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 3: Security Hardware

CompTIA Exam Objectives 220-1101, Domain 3.5

============

2.4GHz Wi-Fi signals have better penetration through walls and other obstacles compared to 5GHz and 6GHz. Lower frequency waves (like 2.4GHz) travel farther and are less absorbed by physical barriers.

From the CompTIA A+ 220-1101 Official Study Guide, Objective 2.5 – Compare and contrast wireless networking protocols:

“The 2.4GHz frequency band offers greater range and better penetration through walls and obstacles than higher frequencies like 5GHz and 6GHz. Higher frequencies provide faster speeds but are more easily absorbed by walls.”

NFC (Near Field Communication) is not a Wi-Fi technology and works only over very short distances (a few centimeters).

Verified Source:

CompTIA A+ Core 1 (220-1101) Official Study Guide, Chapter 2: Wireless Networking

CompTIA Exam Objectives 220-1101, Domain 2.5

============

Comprehensive and Detailed Step-by-Step Explanation:

When delivering 10Gbps speeds over long distances, fiber optic cables are the best choice. Here’s the breakdown:

A. Multimode Fiber (Correct Answer):

Multimode fiber is designed for relatively short to medium distances (up to 1,312 feet or 400 meters) while supporting high-speed data transfer (10Gbps and above).

It uses LED light sources and is cost-effective for environments like data centers or within buildings.

For the specified distance of over 328ft but under 1,312ft, multimode fiber is the most suitable option.

Incorrect Options:

B. Single-mode Fiber: While single-mode fiber supports much greater distances (up to several miles or kilometers) and higher speeds, it is more expensive and unnecessary for the specified range. Single-mode fiber is generally used for long-haul networking or telecommunications.

C. Cat 6a: Cat 6a is capable of 10Gbps speeds but only up to 328ft (100 meters). It cannot reliably handle the specified distance of over 328ft.

D. Cat 6: Cat 6 is also limited to 10Gbps speeds at distances up to 328ft (100 meters). Beyond this range, it is unsuitable.

Key Takeaway:

For delivering 10Gbps speeds over distances longer than 328ft (100m) but under 1,312ft (400m), Multimode Fiber is the best choice due to its ability to support high-speed data over medium distances at a reasonable cost.