220-1201 Exam Dumps - CompTIA A+ Core 1 Exam (2026)

The correct answer is WAN (Wide Area Network). According to CompTIA Core 1 (220-1201) networking fundamentals, a WAN is used to connect devices or networks over large geographic areas, typically through an Internet Service Provider (ISP). A WISP (Wireless Internet Service Provider) delivers internet connectivity wirelessly over long distances, which clearly falls under WAN technology.

In this scenario, the technician connects a WISP modem to a portable router to provide Ethernet connectivity to a laptop. The WISP modem represents the WAN link, as it connects the local device to an external network (the internet) managed by the service provider. The portable router then distributes that WAN connection locally via Ethernet.

A SAN (Storage Area Network) is used for high-speed storage communication between servers and storage devices and is unrelated to internet connectivity. A PAN (Personal Area Network) is limited to very short-range connections, such as Bluetooth between personal devices. A MAN (Metropolitan Area Network) covers a city or campus-scale area and is not applicable to a single modem-to-router setup.

CompTIA emphasizes identifying network types based on scope and provider involvement. Since a WISP connection extends beyond the local environment and connects to an ISP, it is classified as a WAN.

Dot matrix printersuse aninked ribbonthat physically contacts the paper through tiny pins. Over time, the ribbon wears out or dries up, resulting infaded or light print output. Replacing the ribbon restores print quality.

Option A:Cleaning helps with image clarity, not ink density.

Option C:Maintenance kits apply to laser printers, not dot matrix.

Option D:Calibration affects print position, not darkness.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.7: Given a scenario, troubleshoot common printer problems.

===========

The correct answer is B. Inspect and replace the printer rollers .

According to CompTIA A+ Core 1 220-1201 objectives under Printers:

Frequent paper jams with no visible obstruction are often caused by worn or dirty feed rollers , which fail to grip and feed paper properly.

Inspecting and replacing the rollers ensures smooth paper feeding and prevents repeated jams, particularly in high-use network printers.

Why the other options are incorrect:

A. Check for firmware updates: Firmware updates address software or functionality issues, not mechanical paper feeding problems.

C. Reseat the fuser assembly: Fuser issues typically cause smudging or incomplete toner adhesion, not paper jams.

D. Clean the corona wire: The corona wire affects toner adhesion and print quality, not paper feeding.

A sandbox is a secure, isolated environment used to test potentially harmful software or code. It prevents the software from affecting the main system, allowing safe malware testing. Thismethod is standard in cybersecurity best practices.

From the configuration, the Sales and Customer Service ports are hard-set to full duplex, 1000 Mbps, while the Marketing interface (GigabitEthernet0/3) is set to duplex auto and speed auto. CompTIA A+ explains that mismatched or lower-negotiated speeds and duplex settings can cause noticeable network slowdowns, collisions, and retransmissions—especially at busy times of the day when utilization is high.

Because all cabling is Cat 5e, it fully supports Gigabit Ethernet, so the cabling is not the limiting factor. The IP addresses are all in the same subnet (192.168.1.0/24) and formatted correctly, so there is no subnet or addressing problem. That rules out options A and C.

With speed auto, the Marketing port may be negotiating only 10/100 Mbps, or even a duplex mismatch (e.g., half duplex vs full). This would severely limit throughput compared to the gigabit links used by the other departments. In peak periods, that slower link would become congested first, which matches the users’ reports of performance degradation only in Marketing.

Therefore, the most likely cause is that the Marketing interface is operating at 10/100 instead of 1000 Mbps, making option D correct.

When printing on preprinted forms, correct alignment is critical because the printed text must line up precisely with predefined fields on the paper. According to CompTIA Core 1 (220-1201) printer configuration and troubleshooting objectives, incorrect orientation settings (portrait vs. landscape, or rotated output) are a common cause of print content shifting vertically or horizontally on the page.

If the printer or print driver orientation does not match the layout expected by the form, the output may appear shifted downward or misaligned, even though the correct paper is loaded. Verifying and correcting the orientation setting is a quick, non-invasive first step that often resolves alignment issues without requiring hardware changes.

Verifying the paper type is important, but incorrect paper type usually affects print quality (such as smudging or feeding issues), not precise alignment. PostScript drivers are typically used for complex graphics and publishing but are not the first step for alignment problems. Pickup rollers that fail to grip paper properly usually cause jams or skewing, not consistent downward shifts.

CompTIA emphasizes checking print layout and orientation settings first when dealing with alignment problems on specialized or preprinted documents.

A. Check the product manual for the procedure:

When hardware is not easily accessible, always consult the product manual for proper disassembly procedures. Forcing the cover can damage the laptop or void the warranty.

Product manuals often provide step-by-step instructions for safely accessing internal components.

Incorrect Options:

B. Use a pry tool to force the cover open: Forcing the cover can cause physical damage to the device.

C. Insert the wireless card into the M.2 slot: This step cannot be performed until the cover is properly removed.

D. Try to move the cover by sliding it in all directions: Randomly sliding the cover can cause damage if the correct removal method is not followed.

Key Takeaway: Always refer to the product manual to ensure safe and proper disassembly of laptop components.

The correct answer is B. USB .

In the CompTIA A+ Core 1 (220-1201) objectives under mobile devices and connectivity methods , tethering refers to sharing a mobile device’s internet connection with another device such as a laptop. There are several tethering methods, including USB tethering, Bluetooth tethering, and Wi-Fi hotspot .

USB tethering is considered the most stable and reliable (tethered) connection because:

It uses a physical cable connection , eliminating wireless interference.

It provides consistent bandwidth and low latency .

It also charges the phone while connected , which is an added benefit.

It is less prone to disconnections compared to wireless methods.

Why the other options are incorrect:

A. Bluetooth

Bluetooth tethering is slower and less stable due to limited bandwidth and susceptibility to interference. It is not ideal for high-performance or stable connections.

C. Hotspot

A mobile hotspot uses Wi-Fi, which is wireless , not tethered. While convenient, it is less stable than a wired USB connection and can be affected by interference and signal range.

D. NFC

NFC (Near Field Communication) is used for very short-range communication like payments or quick pairing. It is not used for maintaining a continuous network connection.

Final Answer: B. USB