LEED-Green-Associate Exam Dumps - LEED Green Associate GAFRE Exam (LEED GA)

The Promote Sustainable and Regenerative Material Resource Cycles impact category in LEED encourages the use of materials that can be continually cycled back into the same system at their end-of-life. This is referred to as moving to cyclical, non-depleting material cycles. It promotes the use of renewable or recyclable materials and reduces waste. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

ASHRAE 62.1 is the standard for ventilation and acceptable indoor air quality in commercial and institutional buildings. It specifies the minimum ventilation rates and other measures to provide good indoor air quality for occupants. LEED v4 references ASHRAE 62.1 as a prerequisite for the Indoor Environmental Quality credit category.

ASHRAE 62.1 from the LEED v4 Green Associate Candidate Handbook, page 18.

Enhance Indoor Environmental Quality (IEQ) from the WBDG website, section on Adequate Ventilation and Exhaust.

Paved surfaces absorb and retain heat, increasing local temperatures and contributing to the heat island effect. LEED encourages mitigating this effect by using materials with high Solar Reflectance Index (SRI) or implementing strategies like green roofs and shaded areas​​.

Installing a bioswale is a design technique that should be used to help prevent stormwater damage to the building and surrounding site. A bioswale is a vegetated channel that conveys stormwater runoff while filtering pollutants, reducing peak flow rates, increasing infiltration, and providing habitat. A bioswale can help prevent stormwater damage by reducing erosion, flooding, sedimentation, and contamination of waterways. The other options are not design techniques that should be used to help prevent stormwater damage to the building and surrounding site. Directing runoff into a stream is a design technique that can cause stormwater damage by increasing the volume and velocity of water entering the stream, resulting in erosion, flooding, sedimentation, and contamination of the stream. Paving the site with high Solar Reflectance Index (SRI) material is a design technique that can reduce the heat island effect by reflecting more solar radiation than conventional paving materials, but it does not prevent stormwater damage as it does not reduce runoff or improve water quality. Paving the site with impervious material is a design technique that can cause stormwater damage by preventing infiltration and increasing runoff, resulting in erosion, flooding, sedimentation, and contamination of waterways. References: LEED Green Associate Candidate Handbook, page 32; USGBC [Sustainable Sites], page 4-5.

The LEED for Neighborhood Development rating system has four certification levels: Certified, Silver, Gold, and Platinum. Each level requires a minimum number of points to achieve, based on the total number of available points in the rating system. The total number of available points is 110, and the minimum points for Platinum certification is 801. Therefore, the maximum points a new construction platinum LEED for Neighborhood Development certification level can earn are 110 - 80 = 30 points. However, there are also four regional priority credits that can be earned for addressing geographicallyspecific environmental issues2. These credits are worth one point each, and can be added to the total score of a project. Therefore, the maximum possible points a new construction platinum LEED for Neighborhood Development certification level can earn are 30 + 4 = 34 points. However, the question asks for the maximum points that can be earned by a new construction project. According to the LEED Reference Guide for ND, new construction projects must meet all prerequisites and achieve at least 50% of the points available under the Green Infrastructure and Buildings category3. This category has 21 criteria, each worth one point, except forCertified Green Buildings, which is worth up to five points4. Therefore, the maximum points available under this category are 21 + 4 = 25 points. Since new construction projects must achieve at least 50% of these points, they must earn at least 13 points under this category. This means that they have less points to earn under the other categories (Smart Location and Linkage, and Neighborhood Pattern and Design), which have a total of 32 criteria worth one point each4. Therefore, the maximum points a new construction project can earn under these categories are 110 - 25 - 13 = 72 points. Adding the regional priority credits, the maximum possible points a new construction project can earn are 72 + 4 = 76 points. To achieve Platinum certification, a new construction project must earn at least 80 points1. Therefore, the maximum points a new construction platinum LEED for Neighborhood Development certification level can earn are 80 - 76 = 4 points under each of the four categories: Smart Location and Linkage, Neighborhood Pattern and Design, Green Infrastructure and Buildings, and Regional Priority Credits. Hence, the answer is D. 16.

=

LEED certification for neighborhood development

LEED Reference Guide for ND

LEED for NeighborhoodDevelopment - Wikipedia

LEED rating system

LEED for Neighborhood Development - Infrastructure Tool Navigator

 In the commercial LEED rating systems, achieving 40-49 points will result in Silver level certification. The points are awarded based on how well the project meets various sustainability criteria set out in the LEED rating system. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

A vegetated roof, also known as a green roof, is a roof that is partially or completely covered with vegetation and a growing medium, such as soil or compost. A vegetated roof can help reduce the heat island effect and manage rainwater runoff by providing the following benefits12:

It reduces the surface temperature of the roof by reflecting solar radiation and cooling the air through evapotranspiration, which is the process of plants releasing water vapor from their leaves. This can lower the ambient temperature of the surrounding area and improve thermal comfort for occupants and pedestrians.

It reduces the amount and speed of stormwater runoff by retaining and filtering rainwater in the vegetation and growing medium. This can prevent flooding, erosion, and pollution of downstream water bodies, as well as reduce the demand for potable water for irrigation or other purposes.

It enhances the biodiversity and habitat of the urban environment by providing a space for plants, animals, insects, and microorganisms to thrive. This can improve the ecological health and resilience of the ecosystem and provide aesthetic and recreational benefits for humans.

Other strategies that can contribute to reducing the heat island effect and managing rainwater runoff are:

White cement roof pavers: These are tiles made of concrete that have a high solar reflectance index (SRI), which measures how well a surface reflects solar radiation. White cement roof pavers can help reduce the surface temperature of the roof by reflecting more solar radiation than darker or less reflective materials. However, they do not provide any benefits for stormwater management, as they are impervious surfaces that do not retain or filter rainwater34.

A rainwater collection system: This is a system that captures and stores rainwater from roofs or other surfaces for reuse. A rainwater collection system can help reduce stormwater runoff by diverting rainwater from landfills or incinerators to other destinations, such as irrigation, toilet flushing, or cooling. However, it does not provide any benefits for reducing the heat island effect, as it does not affect the surface temperature of the roof or the surrounding air5 .

Shading structures that include photovoltaic panels: These are structures that provide shade for roofs or other surfaces by blocking direct sunlight. Shading structures that include photovoltaic panels can help reduce the heat island effect by lowering the surface temperature of the roof or the shaded area. They can also help generate renewable energy from solar power, which can reduce greenhouse gas emissions and energy costs. However, they do not provide any benefits for stormwater management, as they do not retain or filter rainwater .