H12-821_V1.0 Exam Dumps - HCIP-Datacom-Core Technology V1.0

Hello packets are the most basic and essential type of OSPF packets used for the following purposes:

Neighbor discovery – Routers use Hello packets to discover other OSPF routers on the same link.

Neighbor relationship establishment – When two routers exchange matching Hello packets, they move from the " Init " state to " 2-Way " and further into adjacency states.

Neighbor relationship maintenance – Hello packets are sent periodically to ensure that neighbors are still reachable. If Hello packets are missed within the dead interval, the neighbor is considered down.

Neighbor deletion is not a direct function of Hello packets. Neighbor deletion results indirectly from missed Hello packets.

Comprehensive and Detailed Step-by-Step Explanation:

1. Understanding IGMP (Internet Group Management Protocol):

IGMP is used in multicast networking to manage membership of devices in multicast groups.

Key parameters in the configuration provided:

Interface IP Address: 192.168.1.1

IGMP Version: 2

Query Interval (Configured): 60 seconds

Maximum Query Response Time: 10 seconds

Querier Address: 192.168.1.1

2. Analysis of Each Statement:

Option A: The IP address of the interface is 192.168.1.1.

Correct (True Statement).

The configuration clearly shows that the IP address of the interface is 192.168.1.1.

Option B: The maximum response time to Query messages is 10s.

Correct (True Statement).

The configuration explicitly mentions: Value of maximum query response time for IGMP: 10 s.

Option C: The interval for sending Group-Specific Query messages is 60s.

Incorrect (False Statement).

The 60-second value refers to the query interval , which is the time interval between general queries sent by the querier.

The interval for group-specific queries is not specified in this configuration. It is determined dynamically based on the multicast environment and is usually shorter than the general query interval.

Option D: The IGMP version is IGMPv2.

Correct (True Statement).

The configuration specifies: Current IGMP version is 2.

3. Why Option C is False:

The 60-second value is for general query interval , not group-specific query interval.

The statement misinterprets the configuration, making it false .

4. Summary:

Correct Answer: C (The interval for sending Group-Specific Query messages is 60s).