SPI Exam Dumps - Sonography Principles and Instrumentation

Comprehensive and Detailed Explanation From Exact Extract:

Spectral Doppler aliasing occurs when the Doppler frequency shift exceeds the Nyquist limit. The Doppler shift is proportional to the cosine of the Doppler angle. Increasing the Doppler angle (moving closer to 90 degrees) reduces the cosine value, thus reducing the Doppler shift frequency and helping to avoid aliasing.

According to sonography instrumentation reference:

“Increasing the Doppler angle reduces the Doppler shift frequency, thus decreasing the likelihood of aliasing in spectral Doppler.”

Therefore, the correct answer is A: Increase Doppler angle.

—

Color Doppler imaging is most effective when the angle between the ultrasound beam and the flow of blood is small.

At an angle of 88 degrees, the flow of blood is nearly perpendicular to the ultrasound beam.

When the angle is close to 90 degrees, the Doppler shift (frequency change) approaches zero, resulting in little to no color being visualized on the Doppler image.

Thus, to obtain a color signal, the angle should be optimized to be as close to 0 degrees as possible, with 60 degrees being the practical limit for accurate Doppler measurements.References:

ARDMS Sonography Principles and Instrumentation guidelines on Doppler angle and its effect on Doppler imaging.

Comprehensive and Detailed Explanation From Exact Extract:

Lateral resolution depends on beam width, which is narrowest at the focal zone. Therefore, positioning the focal zone at the area of interest improves lateral resolution.

According to sonography instrumentation reference:

“Lateral resolution is primarily determined by beam width, which is narrowest at the focus. Optimal lateral resolution occurs at the focal zone.”

Therefore, the correct answer is B: Focal zone.

—

Comprehensive and Detailed Explanation From Exact Extract:

When sound passes through a structure that attenuates less than surrounding tissue (e.g., fluid-filled cyst), more sound reaches the tissues behind it, causing them to appear brighter. This artifact is called enhancement (or posterior acoustic enhancement).

According to sonography instrumentation reference:

“Posterior enhancement appears as increased echogenicity distal to a weakly attenuating structure due to greater beam intensity reaching deeper tissues.”

Therefore, the correct answer is A: Enhancement.

—

Heat and Transient: Heat and transient are not classifications of cavitation.

Thermal and Mechanical: These terms refer to different bioeffects of ultrasound but are not types of cavitation.

Stable and Transient: These are the two types of cavitation observed in tissues during ultrasound. Stable cavitation involves the oscillation of gas bubbles without collapse, while transient cavitation involves the violent collapse of gas bubbles, which can generate high temperatures and shock waves.

Thermal and Stable: Thermal effects are a different concept related to tissue heating, not a type of cavitation.

Comprehensive and Detailed Explanation From Exact Extract:

As frequency increases, attenuation (energy loss due to absorption, scattering, and reflection) also increases. This limits penetration but improves resolution for superficial structures.

According to sonography instrumentation reference:

“Attenuation increases directly with frequency, limiting penetration but enhancing resolution in superficial imaging.”

Therefore, the correct answer is C: Attenuation.

—

The Mechanical Index (MI) is related to the likelihood of cavitation, which is the formation of gas bubbles in a liquid due to the low-pressure regions of the ultrasound wave. MI is a parameter that predicts the potential for mechanical bioeffects, including cavitation. A higher MI indicates a greater likelihood of cavitation occurring. It is calculated based on the peak negative pressure and the frequency of the ultrasound wave.

ARDMS Sonography Principles and Instrumentation guidelines

Kremkau, F. W. (2015). Diagnostic Ultrasound: Principles and Instruments.

Comprehensive and Detailed Explanation From Exact Extract:

Persistence is a post-processing technique that averages multiple consecutive image frames to reduce random noise and improve image smoothness. This is especially useful for reducing speckle and enhancing the clarity of stationary or slow-moving structures.

According to official sonography Principles and Instrumentation documentation:

"Persistence uses frame averaging, combining data from several sequential frames to reduce noise, enhance image quality, and stabilize the appearance of stationary structures."

Demodulation (A) is part of signal processing that extracts the Doppler frequency shift.

Compression (C) alters the dynamic range of the image but does not reduce noise through frame averaging.

Time gain compensation (D) adjusts amplification at various depths to equalize brightness but does not perform frame averaging.

Therefore, the correct answer is B: Persistence.

QUESTION NO12

What does this image demonstrate?

A ultrasound of a fetus Description automatically generated

A. Presence of flow

B. Direction of flow

C. Color aliasing

D. Color inversion

Answer: C

Comprehensive and Detailed Explanation From Exact Extract:

In the provided image, the color Doppler display shows a mixture of colors (typically red, yellow, and shades shifting abruptly), indicating that velocities have exceeded the Nyquist limit — the maximum detectable Doppler shift for the given pulse repetition frequency (PRF). This creates a color aliasing artifact.

According to the official sonography Principles and Instrumentation documentation:

"Color aliasing occurs when flow velocities exceed the Nyquist limit, causing a wrap-around of the color scale. This results in abrupt changes in color hue that do not accurately represent flow direction or velocity."

Presence of flow (A) is correct but too general.

Direction of flow (B) refers to color assignment but not to the artifact seen.

Color inversion (D) inverts the color map but does not cause the abrupt color changes seen here.

The alternating, banded colors are classic for color aliasing, confirming that the correct answer is C: Color aliasing.