350-401 Exam Dumps - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)

Go to page:

<< First
Prev
1
2
3
4
5
6
7
8
9
10
Next
Last >>

Question # 65

Exhibit.

Security policy requires all idle-exec sessions to be terminated in 600 seconds. Which configuration achieves this goal?

line vty 0 15

absolute-timeout 600

line vty 0 15

exec-timeout

line vty 01 5

exec-timeout 10 0

line vty 0 4

exec-timeout 600

Full Access

Question # 66

Refer to lhe exhibit. An engineer deploys a script to retrieve the running configuration from a NETCONF-capable CiscoIOSXE device that Is configured with default settings. The script fails. Which configuration must be applied to retrieve the configuration using NETCONF?

Option A

Option B

Option C

Option D

Full Access

Question # 67

An engineer must create an EEM script to enable OSPF debugging in the event the OSPF neighborship goes down. Which script must the engineer apply?

event manager applet ENABLE_OSPF_DEBUGevent syslog pattern "%OSPF-1-ADJCHG: Process 5. Nbr 1.1.1.1 on SerialO/0 from FULL to DOWN"action 1.0 cli command "debug ip ospf event"action 2.0 cli command "debug ip ospf adj"action 3.0 syslog priority informational msg "ENABLE_OSPF_DEBUG

event manager applet ENABLEOSPFDEBUGevent syslog pattern "%OSPF-5-ADJCHG: Process 5, Nbr 1.1.1.1 on SerialO/0 from LOADING to FULL"action 1.0 cli command "debug ip ospf event"action 2.0 cli command "debug ip ospf adj"action 3.0 syslog priority informational msg "ENABLE JDSPF_DEBUG"

event manager apple! ENABLE OSPFDEBUGevent syslog pattern "%OSPF-5-ADJCHG: Process 5. Nbr 1.1.1.1 on SerialO/0 from LOADING to FULL"action 1.0 cli command "enable"action 2.0 cli command "debug ip ospf event"action 3.0 cli command "debug ip ospf adj"action 4.0 syslog priority informational msg "ENABLE_OSPFJ} EBUG"

event manager applet ENABLE_OSPF_DEBUGevent syslog pattern "%OSPF-5-ADJCHG: Process 6. Nbr 1.1.1.1 on SerialO/0 from FULL to DOWN"action 1.0 cli command "enable"action 2.0 cli command "debug ip ospf event"action 3.0 cli command "debug ip ospf adj"action 4.0 syslog priority informational msg "ENABLE_OSPF_DEBUG'*

Full Access

Question # 68

What is a fact about Cisco EAP-FAST?

It requires a client certificate.

It operates in transparent mode.

It Is an IETF standard.

It does not require a RADIUS server certificate.

Full Access

Question # 69

Which two pieces of information are necessary to compute SNR? (Choose two.)

EIRP

noise floor