PEGACPRSA22V1 Exam Dumps - Certified Pega Robotics System Architect 22

Comprehensive and Detailed Explanation From Pega Robotics System Exact Extract:

During interrogation of web applications, developers often encounter dynamic or hidden controls — such as drop-down menus or hover-triggered lists — that do not immediately appear on the page.

To successfully interrogate these elements, Pega Robot Studio provides two essential tools:

The Delay option on the Interrogation Form, which allows the developer time to trigger the hidden control before capture.

The Select Element option, which enables precise selection of an element directly from the DOM, even if it is not immediately visible.

According to the Pega Robotics System Design and Implementation Guide, section “Interrogating Dynamic and Hidden Web Controls”:

“When interrogating hidden or dynamically rendered controls:

Use the Delay option on the Interrogation Form to give yourself time to hover over or activate a hidden control before Robot Studio attempts to capture it.

Use the Select Element option to manually highlight and select a control from the web application’s DOM, even when it is displayed only after an interaction such as mouse hover.These methods are particularly effective for controls that expand or render asynchronously, such as drop-down menus or tooltip-triggered elements.”

Detailed Step Reasoning:

C. Use the Delay option on the Interrogation Form.

Correct.

The Delay setting pauses the interrogation process for a specified number of seconds, allowing you to hover over the hidden element (e.g., AddressType menu) and make it visible before capture.

Once the menu appears, Pega Robot Studio can detect and interrogate it.

D. On the Interrogation Form, select Select Element.

Correct.

The Select Element tool allows manual selection of an element directly from the web page’s HTML DOM structure.

This is especially useful for hidden or dynamically rendered elements like the AddressType dropdown that may not be visible until hovered over.

Incorrect Options Explained:

A. In the Interrogation Form dialog box, select HTML Table Editor.

Incorrect.

The HTML Table Editor is used to inspect and modify HTML table-based controls (grid or table structures), not dynamic menus.

B. On the Web Controls tab, select the page, and then click List Web Controls.

Incorrect.

The List Web Controls option lists already recognized controls in the DOM but cannot reveal or capture hidden dynamic elements.

E. On the Application tab, click the Virtual Controls tab.

Incorrect.

Virtual Controls are used for defining custom controls when the default adapter cannot identify one, not for capturing hidden menu elements.

Final Correct Answer:

C. Use the Delay option on the Interrogation Form.

D. On the Interrogation Form, select Select Element.

Comprehensive and Detailed Explanation From Pega Robotics System Exact Extract:

An application project item in Pega Robot Studio represents an integration layer between the automation project and an external application (Windows, Web, or Text). Each project item defines how to launch, attach, and control the target application.

According to the Pega Robotics System Design and Implementation Guide, in the section “Application Project Items Overview”, it states:

“An application project item defines the interaction between a robotic solution and an external application.

It provides properties, methods, and events that allow the automation to start, monitor, and control the target application.

Pega Robot Studio supports application project items for Windows, Web, and Text adapters, enabling integration with all major enterprise application types.”

Detailed Reasoning:

Option A is correct because application project items are the mechanism by which Pega Robotics integrates with Windows, Web, and Text applications on the client machine.

Option E is correct because each application project item exposes properties, methods, and events that control application behavior (for example, launch, close, monitor, or read UI data).

Option B is incorrect — Pega Platform integration is handled through Robot Manager or Runtime API, not through application project items.

Option C is incorrect — Application items do not use REST or JavaScript; these are specific to web connectors.

Option D is incorrect — Deployment orchestration and robot monitoring are performed by Robot Manager, not by an application project item.

Comprehensive and Detailed Explanation From Pega Robotics System Exact Extract:

According to Pega Robotics Studio – Matching and Interrogation Tools Documentation:

“Matching defines how a control is identified at runtime. When application hierarchies change or specific match rules fail, Robot Studio provides diagnostic tools to reestablish and verify the correct control associations.”

The guide specifies the following tools and their purpose:

Refresh Matching

“Refresh Matching updates the control’s properties and hierarchy information based on the current application structure without re-interrogating the control. This tool is useful when an application’s DOM or hierarchy has changed.”

Debug Matching

“Debug Matching opens the Match Rules Diagnostics window and evaluates each match rule in real-time to show which rules pass or fail. It assists in identifying which match rule must be corrected or replaced.”

By contrast:

Replace Matching – Recreates the match rules from scratch (not the preferred first step).

Replace Control – Reinterrogates the entire control and removes existing references (used only when the control is entirely invalid).

Debug Control – Analyzes properties but not matching logic.

Thus, the two correct tools to address the described issues are:

Refresh Matching (for hierarchy change)

Debug Matching (for failed rule troubleshooting)

References (Exact Extract Source):

Pega Robotics Studio – Matching Diagnostics and Interrogation Guide

Pega Robotics System Architect Training – Debugging and Refresh Matching Modules

Pega Robotics Help – Managing Match Rules in Chrome/Edge/Web Adapters

Final Verified Answer: A, C

Comprehensive and Detailed Explanation From Pega Robotics System Exact Extract:

In Pega Robot Studio, the Start My Day (SMD) functionality allows a user to define and launch all required applications at once when starting work. The configuration of these applications is performed in the Manage Applications window, where each application can be individually enabled or disabled for automatic startup.

According to the Pega Robotics System Design and Implementation Guide, in the section “Start My Day Configuration and Manage Applications”, the documentation specifies the following:

“Applications configured for Start My Day will launch automatically when the Start My Day feature is invoked.

The Manage Applications dialog lists all project applications and determines which ones are launched using the ‘Enabled’ checkbox.

Only applications marked as enabled will be started when the user initiates Start My Day. Applications that are listed but not enabled remain closed.”

The screenshot in the question shows the following configuration under the Manage Applications window:

Application

Enabled

Type

Path

Pega Finance

Yes

Adapter

C:\Users\Pega Training\Desktop\BankerInsight...

BankerInsight

Yes

Adapter

C:\Program Files (x86)\CRM Setup\CRM.exe

CRM

No

Exe

C:\Program Files (x86)\CRM Setup\CRM.exe

Notepad

Yes

Exe

C:\Windows\notepad.exe

From this configuration, the Enabled column indicates that the following applications will start automatically when Start My Day is triggered:

Pega Finance

BankerInsight

Notepad

The CRM application is not enabled and therefore will not launch.

Option Analysis:

Option A (Pega Finance, Notepad, BankerInsight): Correct, as these are the enabled applications.

Option B (CRM, BankerInsight): Incorrect, because CRM is not enabled.

Option C (CRM, Notepad, BankerInsight): Incorrect, because CRM is not enabled.

Option D (Pega Finance, CRM, Notepad, BankerInsight): Incorrect, because CRM is not enabled.

Therefore, the correct answer is A. Pega Finance, Notepad, BankerInsight.

Comprehensive and Detailed Explanation From Pega Robotics System Exact Extract:

In Pega Robot Studio, the StartMethod and Path properties determine how an adapter attaches to or launches a target application. When interrogating applications, these configurations must be correctly defined for Robot Studio to recognize and interact with the application’s user interface elements.

According to the Pega Robotics System Design and Implementation Guide, in the section “Application Adapter Properties and Interrogation Settings”, it states:

“The StartMethod property defines how Pega Robot Studio connects to or starts an application.

When using the ‘MonitorAll’ method, Robot Studio does not start the application automatically; instead, it waits for an existing instance of the application to be detected at runtime.

If the ‘Path’ property is undefined when using MonitorAll, the adapter has no reference to locate or attach to the running process, preventing interrogation of controls.”

Detailed Reasoning:

The MonitorAll StartMethod is typically used to attach to an already running application rather than launching a new instance.

For this to function correctly, Robot Studio needs to know which process to monitor, and that is determined by the Path property (the executable location of the target application).

If the Path property is missing or left undefined, Robot Studio cannot identify which process to monitor, even though the application may appear to launch.

As a result, the bullseye tool will not function because no valid application handle is established for interrogation.

Option Analysis:

A. Incorrect — StartAndWait requires both the executable and window parameters, but the symptom here points specifically to an undefined Path under MonitorAll.

B. Incorrect — StartOnProject determines whether the app launches with the project, not whether it can be interrogated.

C. Incorrect — Start with undefined TargetPath would prevent the app from launching, but the question states the app does load.

D. Correct — Using MonitorAll without a defined Path prevents Robot Studio from attaching to the process, disabling interrogation.

Therefore, the correct answer is D — the StartMethod on the application is set to MonitorAll, but the Path property is undefined.