H35-211_V2.5 Exam Dumps - HCIP-Access V2.5

In IP multicast, only one copy per multicast group (program) is forwarded upstream, regardless of how many users are watching it. Replication happens downstream at the access/edge, not toward the core. Therefore the upstream traffic equals the number of active multicast groups × per-group bitrate:

20 programs × 2 Mbit/s = 40 Mbit/s.

This behavior is consistent with Huawei’s multicast feature descriptions and general multicast principles (IGMP/PIM), which explain that multicast traffic is sent as a single flow per group and replicated only where branching occurs, not multiplied by user count.

Huawei devices support independent mapping/remarking for inner and outer VLAN priorities (802.1p CoS) when QinQ is used. Operators can define distinct mapping tables or remark rules per tag. Option A is incorrect (priorities can be derived or remarked, not “must be” tag-in-packet), option C is incorrect because mapping profiles are configurable, and option D confuses VLAN IDs with priorities; inner/outer CoS can be mapped independently for inbound/outbound directions.

In Huawei access network devices (such as MA5800, EA5800, and SmartAX series), the DHCP Option 82 (Relay Agent Information Option) feature is used to identify the source location of DHCP requests coming from users connected to access ports.

This helps the DHCP server assign IP addresses based on access topology information, such as slot, port, and VLAN IDs.

When Option 82 is enabled globally and within the VLAN service profile, and the port/service-port is configured to allow user-side packets to carry Option 82, the device processes incoming DHCP requests as follows:

If a user-side DHCP packet does not contain Option 82:→ The device automatically adds local Option 82 information (e.g., circuit ID, remote ID) before forwarding it to the DHCP server.

If a user-side DHCP packet already contains Option 82:→ The device removes (strips) the existing Option 82 field to prevent spoofing or inconsistent location data.→ Then it adds its own local Option 82 information (accurate relay agent data based on the device’s configuration).→ The modified packet is then forwarded to the DHCP server.

This ensures that only trusted network-side Option 82 data is passed along, maintaining accurate user-location binding for IP address management and security.

Therefore, the correct behavior is:

The access device strips the Option 82 field from the user packet and adds its own local Option 82 information.

References (Aligned with HCIP-Access V2.5 and Huawei Technical Documents):

HCIP-Access V2.5 Study Guide – “Huawei Campus Network Overview” Chapter, Section: DHCP Relay and Option 82 Mechanism

Huawei MA5800/EA5800 Configuration Guide – IP Service → DHCP Relay and Option 82 Configuration

Huawei Enterprise Networking Product Documentation: “Understanding DHCP Option 82 Processing”

Huawei Access Network Feature Guide, Section: Processing Policies of DHCP Packets with Option 82

This is wrong. A PON port LED not green may indicate several states—not only a hardware fault. It can mean the port is administratively shutdown, no ONUs are registered, or the port is in an alarm or idle state depending on the LED color and blinking pattern. Fault requires correlation with alarms and performance counters in U2000, not LED color alone.

The statement is wrong. SIP explicitly allows several header fields to appear multiple times within a request or response—for example, Via (one per hop), Route, Record-Route, and Contact may legitimately occur more than once. This is fundamental to SIP routing behavior, where each proxy appends a new Via entry. RFC 3261 explains processing based on the top Via among potentially multiple Via headers, which directly contradicts the claim that “a single information value never appears multiple times