PCI SSC CPSA_P_New Exam Dumps - Valid Questions Answers

According to the PCI Card Production and Provisioning Physical Security Requirements, the vendor must have an alarm system that monitors and detects unauthorized access to the card production and provisioning facilities, and that alerts the security control room or a central monitoring service. The alarm system must also be able to identify the location and cause of the alarm, and allow authorized personnel to reset it. The alarm system must be operational 24/7, and must be tested at least annually. The vendor must also have procedures to respond to alarms and incidents, and to report them to the relevant parties. If the alarm system does not send alerts to the security control room, or a central monitoring service, during working hours, the vendor may not be able to comply with these requirements, and may not be able to prevent, detect, or respond to unauthorized access or security breaches. This may cause a problem for their assessment, as they may not meet the PCI Card Production and Provisioning Physical Security Requirements. References: PCI Card Production and Provisioning Physical Security Requirements and Test Procedures v3.0, January 2022, pages 9-101

According to the PCI Card Production Logical Security Requirements, a vendor’s HSA access must be enforced by a security turnstile that has a logical access-control system that ensures anti pass-back. This means that the system must prevent a person from using the same badge to enter or exit the HSA more than once without completing the access cycle. The access cycle is the process of entering or exiting the HSA through the turnstile, which may involve biometric verification, PIN entry, or other authentication methods. The status of the access must change upon initial presentation of an authorised badge, prior to completion of the access cycle, to prevent another person from using the same badge to enter or exit the HSA. For example, if a person presents an authorised badge to enter the HSA, the system must register that the badge is inside the HSA and deny access to anyone else who tries to use the same badge until the person exits the HSA with the same badge. References: PCI Card Production Logical Security Requirements, v2.0, April 2019, page 12

 According to the PCI Card Production Physical Security Requirements, the receptionist responsible for the entrance and departure of visitors must have an unobstructed view of the reception area at all times. This is to ensure that the receptionist can monitor and control the access of visitors, and to prevent any unauthorized entry or exit of personnel or materials. The receptionist must also have a means of verifying the identity of visitors, such as a photo ID or a visitor log, and a means of issuing and collecting visitor badges, such as a badge printer or a badge holder. The receptionist must also have a means of communicating with the security personnel or the security control room, such as a phone or an intercom, in case of any emergency or suspicious activity. References:

• PCI Card Production Physical Security Requirements, v2.0, April 2019, page 21, requirement 5.3.1
• PCI Card Production Physical Security Requirements, v2.0, April 2019, page 22, requirement 5.3.2
• PCI Card Production Physical Security Requirements, v2.0, April 2019, page 23, requirement 5.3.3