TCP-EMS8 Exam Dumps - TIBCO Enterprise Message Service 8 Certification Exam
Which statement is true about acknowledgment modes for non-transacted sessions?
Options are :
What are two possible actions a Mediation implementation type can take when the underlying service times out? (Choose two.)
Options are :
Which two parameters in the main configuration file affect memory usage of the EMS
server? (Choose two.)
Options are :
What are three limitations in the use of wildcards by EMS clients? (Choose three.)
Options are :
Which two JMS message types are supported by Text Message Serializer? (Choose two.)
Options are :
Which activity is appropriate for implementation as a synchronous request-reply operation?
Options are :
A service had an inbound SOAP/HTTP binding. There is no external load balancer available. The Invocation overhead under extremely high load volumes causes requests to queue for dispatch. What is the recommended way to improve request dispatch concurrency?
Options are :
TIBCO Enterprise Message Service Certification Exam Set 2
Atopic sales, topic is bridged to two queues: FINANCE.Q and AUDIT.Q. Ten messages
are sent on the topic SALES.TOPIC. A consumer reads ten messages from FINANCE.Q.
How many messages are now in the AUDIT.Q?
Options are :
ten
zero
twenty
five
Answer : ten
Which two actions are most likely to improve EMS server performance? (Choose two.)
Options are :
Increasing network I/O capacity on the server
Improving physical disk performance
B,D
Switching from a file-based store to a database store
Adding an additional CPU to the server running EMS
Answer : B,D
Which two statements are true about load balancing with EMS? (Choose two.)
Options are :
Load balancing should be avoided when the application requires strict message ordering.
A,C
Each consumer must maintain connections to all servers.
EMS servers should not be load balanced with durable subscribers.
Two load balanced servers can also be configured as a fault-tolerant pair.
Answer : A,C
Which two statements are true about routing queue messages? (Choose two.)
Options are :
Queue messages can travel multiple hops.
The concept of zones and hops does not apply to queue messages.
B,C
Each server in the route path must have its queue defined as global.
Routed queue messages can travel to adjacent servers without reaching the home queue.
Answer : B,C
Which two statements are true about writing a LoginModule, which implements a JAAS
interface? (Choose two.)
Options are :
The LoginModule must be named JAASLoginModule.
B.D
The LoginModule must be thread-safe.
The LoginModule must use SSL.
The LoginModule must accept the password from the EMS server byway of a callback.
Answer : B.D
Which two datastores are supported by EMS servers? (Choose two.)
Options are :
A,D
ledger file
in-memorydatagrid
file
mstore
Answer : A,D
Which three commands must be executed to ensure that user ui can only send messages
to queue qi? (Choose three.)
Options are :
addprop queue q1 exclusive user=u1
A,D,E
addprop queue q1 secure
set server authorization=enabled
grant admin connect user =u1, queue=q1
grant queue q1 user =u1 send
Answer : A,D,E
Which two statements are true about asynchronous message consumption? (Choose two.)
Options are :
An asynchronous durable subscriber exits once it registers its callback with the server.
Asynchronous consumers must use asynchronous message stores,
A,C
Asynchronous consumers use a callback to handle messages,
Each asynchronous consumer object can have at most one listener.
Answer : A,C
Which two objects are referred to as EMS administered objects?
Options are :
A & B
connection factories
groups
topics
Answer : A & B
Which four commands grant the user Bob permission to view topic topic, sample? (Choose
four.)
Options are :
Grant topic topic.sample user=Bob view
Grant admin Bob view topic.sample
Grant topic topic.> user=Bob view
Grant admin Bob view-all
A,B.D.E
Grant topic > user=Bob view
Grant admin Bob view topics
Answer : A,B.D.E
Which four parameters in tibemsd.conf can be used to quickly identity network connection
failures between EMS clients and servers? (Choose four.)
Options are :
server_client_heartbeat
Server_timeout_client_connection
server_heartbeat_client
client_heartbeat_server
server_client_timeout
client_timeout_server_connection
A,C,D,E
Answer : A,C,D,E
Which two statements are true about logging and tracing capabilities in EMS? (Choose
two.)
Options are :
The location of log file is set in tibemsd.conf file via the log_trace parameter.
Message tracing applies to the header and/or body of the message.
Access control violations can be logged to console or log file.
Message tracing can be applied at the destination level, not at message level.
B,C
Answer : B,C
The following topics are defined in topics.conf:
Larger image
Which Statement is true about the topic mycompany. tibx. eng. all?
Options are :
It is secure, but not global.
It is global, but not secure.
It is global and secure.
It is neither global nor secure.
Answer : It is global and secure.
Given the following configuration:
Larger image
What happens when the jMSExpi ration property is set to 60secwhen producing a
message?
Options are :
Message expires after 90 seconds.
Message expires after 60 seconds.
Message expires after 30 seconds.
Message expires after 120 seconds.
Answer : Message expires after 30 seconds.
Which two statements are true about RELIABLE_DELIVERY mode? (Choose two.)
Options are :
A,C
With RELIABLE_DELIVERY mode, the producer receives a response from the server.
With RELIABLE_DELIVERY mode, the server sends the producer a receipt confirmation.
Reliable mode decreases the volume of message traffic, allowing higher message rates.
It is a TIBCO extension to JMS.
Answer : A,C
How does a backup fault-tolerant server detect a failure of the primary fault-tolerant server?
Options are :
Multicast heartbeats sent from the backup server
Multicast heartbeats sent from the primary server
TCP heartbeats sent from the backup server
TCP heartbeats sent from the primary server
Answer : TCP heartbeats sent from the primary server
Which Administration Tool command sets the maximum size of a queue?
Options are :
Create queue queue.manage maxbytes = value[KB|MB|GB]
Create queue queue.manage msgm = value[KB|MB|GB]
Create queue queue.manage mbytes = value[KB|MB|GB]
Create queue queue.manage size = value[KB|MB|GB]
Answer : Create queue queue.manage size = value[KB|MB|GB]
Which three commands will update EMS configuration files when an exclusive commit
command is issued from EMS? (Choose three.)
Options are :
set server password=password
set server track_message_ids=enabled
B,C,D
set server routing=enabled
set server client trace=enabled
set server authorization=enabled
Answer : B,C,D
Which two conditions can cause messages in a queue to be moved to the undelivered
queue? (Choose two.)
Options are :
The number of pending messages has reached the limit defined for the queue.
A,C
The number of delivery attempts has reached the limit defined for the queue.
The overflow policy for the queue has been set to discard the oldest messages.
The length of time the message has been retained in the queue has exceeded the limit defined for the queue.
Answer : A,C
Two EMS servers have an active/active route between them.
How many connections are used to route messages bi-directionally between them?
Options are :
4
2
1
0
Answer : 1
Which two are valid acknowledgment modes in TIBCO Enterprise Message Service?
(Choose two.)
Options are :
TRANSACTIONAL
A,E
ACKNOWLEDGE_ALL
AUTO_ACKNOWLEDGE
ACK_PRODUCER
CLIENT_ACKNOWLEDGE
Answer : A,E
Which two statements are true about selector functions? (Choose two.)
Options are :
They are available to control the flow of messages along a route.
They are available for use in the bridging functions, helping to reduce unnecessary network traffic.
B,D
They are useful when used in conjunction with topic browser functions.
A selector's conditional expression can refer to values of the message body.
Answer : B,D
Which two transaction policies are supported by TIBCO ActiveMatrix Service Bus? (Choose two.)
Options are :
managed transaction
XA transaction
JDBC transaction
single resource transaction
transacted one-way
C,D
Answer : C,D
You have a routed queue named ORDER. NEW defined between the US-EMS (home
queue) and MEXICO-EMS servers
What must be done for messages to route properly?
Options are :
Send a message to the queue named ORDER, NEW
Send a message to the queue named order. NEW@US-EMS
Define ORDER.NEW@home in the US-EMS server's queues, conf file
Send a message to the routed queue named order. NEW@MEXICO-EMS
Answer : Send a message to the queue named ORDER, NEW
Which three configuration files are used by EMS? (Choose three.)
Options are :
B,E,F
listeners.conf
routes.conf
jaas.conf
producers.conf
consumers.conf
channels.conf
Answer : B,E,F
Which method is used to register the message listener with the message consumer for
asynchronous message consumption?
Options are :
Which two parameters must be edited/added in the tibemsd.conf file when configuring
database-based stores? (Choose two.)
Options are :
Which two statements are true about the transactional abilities of TIBCO EMS? (Choose
two.)
Options are :
You have a routed queue named ORDER. NEW defined between the US-EMS (home
queue) and MEXICO-EMS servers
What must be done for messages to route properly?
Options are :
Which two statements are true about RELIABLE_DELIVERY mode? (Choose two.)
Options are :
Which two objects are referred to as EMS administered objects?
Options are :
Which two statements are true about routing queue messages? (Choose two.)
Options are :
Which measurement determines if the Recovery Time Objective is being achieved?
Options are :
Which two statements are true about server parameters used to configure statistics?
(Choose two.)
Options are :
Which TIBCO Business Events add-on software enables quires using a language that is SQL-like?
Options are :