N10-009 Exam Dumps - CompTIA Network+ Certification Exam

A jump box is a hardened, isolated system that provides secure access to critical infrastructure devices like routers and firewalls.

The answer is C. Multicast . The address 224.7.8.99 falls within the IPv4 Class D range, which is 224.0.0.0 through 239.255.255.255 . That range is reserved for multicast traffic. Multicast is used when one sender needs to deliver traffic to a specific group of receivers rather than to every device on the network or to just one destination.

That is what separates it from the other choices. Broadcast is intended for all hosts on the local broadcast domain. Unicast is one-to-one communication, where a single source sends traffic to one specific destination. Anycast is typically associated with sending traffic to the nearest or best member of a group that shares the same address, not to a multicast group address in the 224.0.0.0/4 range.

From a Network+ point of view, this is a basic address-recognition question. Once you recognize that the destination begins with 224 , the answer should immediately point to multicast. Protocols and streaming applications often use multicast when they need efficient delivery to multiple interested hosts without flooding every device. So in this case, the traffic type is clearly multicast .

If the business shares or duplicates the ISP-assigned public IP address, routing instability and conflicts will occur. Pinging a public IP like 8.8.8.8 may work (since ICMP can bypass certain conflicts), but browsing websites (which requires stable sessions and return traffic) will fail intermittently.

A. If the default gateway were incorrect, no external connectivity would work at all.

B. VLAN mismatch is an internal issue, not affecting ISP routing.

C. Subnet mask misconfiguration would prevent consistent routing but usually blocks ping too.

References (CompTIA Network+ N10-009):

Domain: Network Troubleshooting — Internet connectivity issues, ISP IP conflicts.

For 45 hosts, the minimum subnet size must allow at least 46 usable addresses (1 each for network and broadcast addresses).

A /26 subnet provides 64 addresses, 62 usable — suitable.

A /27 subnet gives only 30 usable — insufficient.

A /25 offers 126 usable — more than needed.

A /28 provides just 14 — too small.

So, the most efficient subnet with minimal wastage is /26.

From Andrew Ramdayal’s guide:

“When designing subnets, always choose the smallest subnet mask that still accommodates all hosts. A /26 provides 62 usable host addresses, suitable for networks with about 50 hosts.”

An evil twin attack occurs when an attacker creates a fraudulent AP with an SSID very similar (or identical) to the legitimate one. Users may accidentally connect, allowing the attacker to capture traffic and credentials.

A. On-path is the consequence of connecting to the evil twin, not the initial attack itself.

B. Rogue AP is any unauthorized access point, but the key here is the malicious mimicry of a legitimate SSID — specifically an evil twin.

D. Tailgating is a physical social engineering attack, unrelated to Wi-Fi.

References (CompTIA Network+ N10-009):

Domain: Network Security — Wireless threats (rogue APs, evil twins).

Comprehensive and Detailed Explanation (aligned to N10-009):

A broadcast message is delivered to all nodes in a broadcast domain (e.g., ARP requests).

A. Unicast is one-to-one.

C. Multicast is one-to-many but only to subscribed members.

D. Anycast is one-to-one-of-many, sending to the nearest node.

References (CompTIA Network+ N10-009):

Domain: Networking Concepts — Traffic types: unicast, multicast, broadcast, anycast.

If a workstation can access the internet and printers (likely in another VLAN) but not internal servers, the port was likely placed into the wrong VLAN after the move. VLAN assignment controls Layer 2 segmentation, restricting access to resources on different VLANs.

A. A wrong default gateway would prevent internet access.

C. An error-disabled port would block all connectivity.

D. A duplicate IP would cause general network issues, not just missing server access.

References (CompTIA Network+ N10-009):

Domain: Network Troubleshooting — VLAN misconfiguration, connectivity issues.

A warm site typically has a full infrastructure ready, but it lacks the most up-to-date data or is not immediately operational. It requires some configuration or data restoration to become fully functional.

=================