Independence Day Special Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: scxmas70

HPE0-V25 Exam Dumps - HPE Hybrid Cloud Solutions

Question # 4

Your customer needs a server that will support a new Big Data analytics solution. The customer requires parallel processing and a server that will use high core counts and memory capacity.

Which server should you recommend?

A.

DL325

B.

SY480

C.

DL385

D.

DL380

Full Access
Question # 5

Which management tool helps HPE customers simplify the management of HPE ProLiant-based NAS solutions?

A.

HPE StoreEasy Management Console

B.

HPE GreenLake Compute Ops Manager

C.

HPE Storage Management Utility v4

D.

HPEOneView

Full Access
Question # 6

Which procedures are recommended as part of the HPE server deployment process? (Select two.)

A.

Create a support case on HPE InfoSight

B.

Configuring the system BIOS

C.

Performing a One-touch deployment using the Aruba CX Mobile App

D.

Register the server to the Data Service Cloud Console

E.

Using HPE Intelligent Provisioning for storage configuration and OS deployment

Full Access
Question # 7

Your customer has a ProLiant DL38O Genl 0 server. They have a health issue with one of the server's power supplies, and they want to download an Active Health System log on to create a support case.

How can they get the Active Health System Log? (Select two.)

A.

Service Pack for ProLiant

B.

Smart Update Manager

C.

iLO web interface

D.

iLO Repository

E.

cURL Utility

Full Access
Question # 8

Your customer received a Customer Advisory for its HPE Tape Library MSL2024 with a critical firmware update. Which tool should be used to update the library?

A.

HPE OneView

B.

HPE Command View for Tape Libraries

C.

HPE Data Services Cloud Console

D.

HPE StoreEver TapeAssure Advanced

Full Access
Question # 9

How do you access the SSD Wear Gauge report?

A.

OneView for Servers

B.

OneView for storage

C.

HPE Infosight portal

D.

Smart Storage Administrator

Full Access
Question # 10

Your customer has a new SAN storage array, and they are concerned that data corruption might occur when servers using different operating systems access the same data.

You need to ensure that only designated host servers have access to their own logical drives.

Which SAN technique should be used?

A.

Inter-Switch traffic delivery

B.

IEEE Structured Addresses

C.

Selective Storage Presentation

D.

Multipath load balancing

Full Access
Question # 11

A customer's infrastructure includes HPE StoreOnce and HPE ProLiant devices. They need an HPE solution that includes cloud-based machine learning, health and performance monitoring that can be used to make proactive decisions.

What should you recommend?

A.

HPE GreenLake Central

B.

HPE iLO Amplifier

C.

HPE InfoSight

D.

HPE OneView

Full Access
Question # 12

You connect to the Compute Ops Management (CoM) through the GreenLake Cloud Platform dashboard. The server you want to manage is missing. Where should the server be added so it appears in the CoM?

A.

Compute Ops Management - Server Groups

B.

GreenLake Cloud Platform - Onboard Devices

C.

Compute Ops Management - Servers

D.

GreenLake Cloud Platform - Manage Subscriptions

Full Access
Question # 13

Match the HPE server models With the appropriate specification.

Full Access
Question # 14

your customer is using HPE Infosight in their environment containing ProLiant and MSA systems.

which product supports automatic case creation through InfoSight?

A.

ProLiant DL120 G7

B.

MSA 2062

C.

MSA2040

D.

proLiant DL560 Gen10

Full Access
Question # 15

Match the protocol to a fundamental approach for storing data. (Each option may be used once, more than once, or not at all.)

Full Access
Question # 16

What does an SSD wear Gauge define?

A.

Remaining lifetime for the SSD drive

B.

Type of technology used within the SSD drive

C.

Type of interface used for the SSD drive

D.

Maximum speed of the SSD drive

Full Access
Question # 17

Match each HPE product With the customer requirements it meets.

Full Access
Question # 18

A customer is running HPE Intelligent Provisioning v3.70 on their DL380 Gen! 0 Plus server. They request an update to the latest version available. How should you complete the upgrade?

A.

Download the 'Intelligent Provisioning Recovery Media' ISO from the HPE Support websites. Boot from ISO and install

B.

Within InfoSight, select the Server - Choose Upgrades - Intelligent Provisioning - Install to start the upgrade process

C.

Select the 'Upgrade' link within the iLO 5 web interface 'Life Cycle Management' section

D.

Download the 'Intelligent Provisioning Recovery Media' ISO from HPE Infosight for Servers. Boot from ISO and install

Full Access
Question # 19

Match the RAID level to the number of drive failures an array can handle without losing data. (Each option may be used once, more than once, or not at all.)

Full Access
Question # 20

A customer wants to create a 3TB boot partition on their HPE Pt0Ljant DL360 Gen10 Plus server.

What setting must De enabled to allow this configuration?

A.

Secure Boot

B.

unlimited Extensible Firmware Interface (UEFI) Boot Mode

C.

Legacy BIOS Boot Mode

D.

Virtuaulization-Maxjmum pertormance

Full Access
Question # 21

you are preparing a proposal to refresh your customers existing OL380 GE and G7 servers With newer generations. Before making a decision, your customer needs to know if a refresh is worth the cost.

Which option show the value of the purchase to your customer?

A.

Solution sales Enablement Tool

B.

selective Storage presentation

C.

TCO/ROI Calculator

D.

Smart CID

Full Access
Question # 22

Your customer wants to receive emails When a hardware event occurs on their HPE proLiant Gen10 server.

Click where you can find the iLO management interface to set this option.

Full Access
Question # 23

Your customer has multiple workloads that they want to move from a Cloud service prover to an on-premises datacenter. They like the flexibility of their current provider but want dedicated hardware and the ability to scale up and down as business needs change.

Which platform is designed for this customer use case?

A.

HPE Superdome Flex platform

B.

HPE Ezmeral Container platform

C.

HPE GreenLake platform

D.

HPE Apollo Systems

Full Access
Question # 24

Your customer has multiple, remote sales offices with one HPE ProL1ant server deployed per Site to run local IT services. They want to centralize the monitoring ana lifecycle management of these servers using a cloud-based offering.

Which tool would demonstrate this functionality?

A.

HPE CloudPhysics

B.

HPE GreenLake Compute Ops Management

C.

HPE GreenLake Data Services Cloud Console

D.

HPE InoSight

Full Access
Question # 25

Match the correct scaling approach to each strategy

Full Access
Question # 26

Your customer needs a server a maximum Of two processors that will provide high performance, manageability, expansion, and security.

Which server should you recommend?

A.

DL560

B.

DL380

C.

DL110

D.

DL20

Full Access
Question # 27

When designing new server environments, you need to determine the maximum equipment wattage and thermal requirements at the unit (chassis) and rack level.

Which HPE tool should be used?

A.

HPE Infosight

B.

HPE Smart Storage Administrator

C.

HPE Power Advisor

D.

HPE OneView

Full Access
Question # 28

Match each HPE tool with its business value.

Full Access
Question # 29

Your customer needs to add a new server to the HPE OneView management console.

What is required to ensure the server can be managed by HPE OneView?

A.

OneView Standard license

B.

Most current firmware installed on the server

C.

OneView Advanced license

D.

10Gb Network

Full Access
Question # 30

Your customer has installed multiple Host Bus Adapters in their server.

What feature is now available to be configured?

A.

increased ethernet frame size

B.

data encryption

C.

TCP offload

D.

multi-path load balancing

Full Access
Question # 31

Match the RAID level with its capacity overhead. (Each option may be used once, more than once, or not at all.)

Full Access
Question # 32

What is required to use remote management in a HPE ProLiant MicroServer Genl 0 Plus Server?

A.

Datacenter Care support

B.

iLO Standard license

C.

HPE InfoSight

D.

iLO Enablement Kit

Full Access