H12-811_V1.0 Exam Dumps - HCIA-Datacom V1.0 Exam

Detailed Explanation:In Huawei's VRP (Versatile Routing Platform) command-line interface, when files are deleted using the delete or delete /unreserved command, they are moved to the recycle bin rather than being permanently deleted. To permanently delete these files, they need to be removed from the recycle bin using the reset recycle-bin command​​.

Device Interconnection Requirements:

Device interconnection (such as point-to-point links) requires only two IP addresses: one for each device.

A subnet mask of /30 (255.255.255.252) provides four total addresses (2 usable, 1 network, 1 broadcast).

Efficiency:

Using a /30 subnet avoids wasting IP addresses, making it ideal for point-to-point links.

Why Other Options Are Incorrect:

B (32): /32 is used for single-host IP addresses, not links.

C (24): /24 is excessive for point-to-point links, providing 254 usable addresses.

D (16): /16 provides 65,534 addresses, which is highly inefficient.

References: HCIA-Datacom V1.0 Certification Guide, Chapter 3: IP Addressing.

The VRP platform does not support configuration through FTP. Configuration methods typically include using a console port, Telnet, or SSH, allowing for direct access to the device configuration. FTP is generally used for file transfer, not direct configuration, and therefore is not a supported method for configuring a router​.

WEP (Wired Equivalent Privacy) supports open authentication, which allows any client to associate with the network without verifying credentials. This form of authentication is considered insecure by modern standards, as it provides minimal protection for network access. WPA and WPA2 rely on pre-shared keys or 802.1X authentication, which are more secure and do not use open authentication​.

The basic IPv6 header has a fixed length of 40 bytes. Unlike IPv4, the IPv6 header is streamlined, omitting some fields (like header checksum) and standardizing the header size. This simplification reduces processing overhead, enhancing routing efficiency and scalability for modern networks​.

SNMP Message Types:

get-request: Sent by the NMS to retrieve data from a device.

set-request: Used by the NMS to modify device settings.

get-response: Sent by the device in response to a get-request.

trap: Sent automatically by a device to notify the NMS of an event.

Why "trap" Is Correct:

If a registered event occurs (e.g., interface down, high CPU usage), the device proactively sends a trap to alert the NMS.

Conclusion:

Since traps notify abnormal events, the correct answer is A (trap).

References: HCIA-Datacom V1.0 Certification Guide, Chapter 7: SNMP and Network Monitoring.