H11-851_V3.0 Exam Dumps - HCIA-Video Conference V3.0
When the multiviewer setting is not performed on the venue after a meeting, the HUAWEI VP9630/50/60 does not support the automatic multiviewer function. ()
Regarding the VPT300 picture-in-picture display, the following description is incorrect?().
The SMC2.0 system supports adding MCUs in three ways: auto-discovery, manageable, and unmanageable. ()
SIP is an application layer protocol, independent of the following transport layer protocols, can be carried on different transport protocols, such as UDP/TCP/TLS, currently the most commonly used TCP. ()
Regarding the C1oudRSE multipoint recording feature, the following description is incorrect?().
The conference access number is the node number of the MCU after the H.323 protocol meets. ()
The function of the redirect server is to map the addresses in the request to zero or more new addresses, which are returned to the client. ()
T1, a high-definition terminal that supports a built-in MCU, convenes a 3-party meeting, with T1 and T2 establishing a peer-to-peer conference before T1 calls T3 After T3 joins the meeting, the original
conference resolution of T1 and T2 may be reduced. ()
GK issues an address resolution request to other GKs, and the signaling sent is ().
SMC2.0 scheduled meetings can not be held normally, what are the possible reasons?
When you create a normal user on SMC3.0 , you must bind a soft terminal to the user.
Idealub local cannot call the remote end through the venue number, and the remote cannot call the local through the venue number, which may be caused by ().
When the TE terminal calls a call set, you can call the venue ID number and the venue IP address of the venue at the same time to convene a multipoint meeting.
Regarding the addition of mcUs to the web interface of SMC3.0, is the following description correct? ( )
McUs are registered with H.323 and need to make a request to Gk when calling a terminal using a number. ()
Huawei's Zhizhen products can be used in scenarios such as distance education, remote courtrooms, and telemedicine. ()
During SVC conferencing, the terminal sends up to 4 video streams to the C1loudMCU/VP98 series NCU, including ().
Regarding the gallery view in a multi-stream meeting, what is the following description incorrect? ()
TE40 supports a PSTN interface where you can connect a phone to a conference over voice ().
In the intelligent collaboration stage, what are the functional features of the video conferencing system? ()
SMC2.0 can manage devices such as TE terminals, MCUs, etc., but cannot manage friendly devices. ()
When we look at the local image output of the terminal on the TV, it is the original video source image that has not been codeced. ()
When the GE port and the optical port are plugged in at the same time, the GE port is preferred, but try not to insert the cable () at the same time
When SVC conferencing, the terminal sends up to 4 video streams to the CloudMCU/VP98 series MCU, including ( ).
There are 4 common meeting initiation methods of TP series Zhizhen , in addition to address book calls, dial call methods, there are also 2 ways of meeting records and common meetings. ()
In a video conference, the camera ( ) feature is used to close-up a participant.
() The message indicates that the request cannot be implemented on any SIP server.
Regarding IdeaHub Configuration Backup and Restore, what is the following description error?
Peer-to-peer conferencing for TE endpoints does not support instant messaging. ()
In a fully adapted MCU conference, the MCU allocates image codec resources to each venue individually.
McUs are registered with H.323 and need to make a request to Gk when calling a terminal using a number. ()
SIP is an abbreviation for Session Initialization Protocol and is used for initialization.) ), altering and terminating sessions of one or more participants, including multimedia conferencing, video, network calls,
etc. ().
The end device registers gK successfully, this process involves a () message.
Regarding the description of meeting administrators and regular users of SMC3.0, the following error is ?()
The necessary prerequisite for IdeaShare screen mirroring software download and pairing is ().
An HTTP connection is established between the SMC and the MCU, and selecting Support HTTPS indicates SMC and MCU Connections between them are in encrypted mode. ()
The MCU VP9630-8 has a processing capacity of 8-way 1080P30 full adaptation, which can be connected to () channel 1080P60 fully adaptable, and can also be connected to () channel 720P fully
adapted to the venue.
VPT300 built-in 16 microphones and 2 face detection cameras, through the microphone array detection sound source localization, combined with the binocular camera collected images for face tracking,
support manual There are four modes of /autoframe/auto/autonoframe. ()
The RSE6500 repackaged the corresponding high/standard-clear on-demand files and sent them to the conference terminal via the () protocol. ()
After IdeaHub is successfully activated, you can join the scheduled meeting with the click of ( ).
When SMC2.0 adds TE series endpoints in a manageable manner, the "username" and "password" and terminal () in the authentication information The user's user name and password are consistent.
Before applying for an SMC2.0 License , you must first obtain an ESN code. ()
The function of a proxy server is to forward requests or responses to clients. You can act as both the server and the client to decide on the next hop to forward the request message. ()
The master call set conference has one more process than the general meeting, and the terminal communicates with the GK signaling, which adheres to the H.225 protocol. ( )
Regarding CloudMCU multi-stream conferencing, the following description is incorrect?().
Regarding the multi-vision function, what is the following description incorrect? ( )
In the six-point conference held using the 96XX series and the MCU, the venueS T1, T2, and T3 form three screens, and the venues T4 and T5 are held , T6 is not in the multi-screen, when T1, T2, T3 left,
the automatic multi-screen function fails, T4, T5 and T6 can automatically generate two-screen modes. ()
In the Client/Server model, the primary function of request proxy server is to decide where to send signaling messages.
The terminal uses VME technology to adapt to different network conditions and carry out data transmission.
Regarding the operation of the Mic 500 , is the following description correct?
TE50 can connect the camera through the COM1 port or COM2 port to control the camera to move up, down, left and right. ()
In IdeaHub's whiteboard interface, the whiteboard content can be erased by means of ( ).
Address resolution is when an SC performs a translation of the IP address of an entity ( ) .
In matters related to IdeaHub installation and configuration, the following statement is incorrect ().