F5CAB4 Exam Dumps - BIG-IP Administration Control Plane Administration (F5CAB4) exam

Reactivating a BIG-IP license is a traffic-disruptive operation. During the license reactivation process, the BIG-IP system performs a configuration reload, which results in a temporary interruption of all traffic processing. Because traffic handling is affected, F5 explicitly recommends scheduling license updates during a maintenance window.

This behavior is documented in F5 Knowledge Base articles, which state that license reactivation impacts traffic and must be planned accordingly during upgrades or system changes.

The other options are not considered disruptive:

Creating a QKView is primarily a diagnostic task and does not interrupt traffic.

Running tmsh save sys config only saves the running configuration to disk.

Generating a UCS is resource-intensive but does not reload configuration or interrupt traffic processing.

When a BIG-IP Administrator changes module provisioning (for example, enabling ASM on a system previously provisioned only for LTM), the BIG-IP system must restart the Traffic Management Microkernel (TMM) process.

The TMM process is responsible for:

Traffic handling

LTM, ASM, and other traffic-processing modules

Enforcing security and application policies

Provisioning changes affect how traffic modules are loaded and integrated into TMM. As a result, TMM is restarted, which causes a temporary interruption of traffic processing. This is expected behavior and is why module provisioning changes should be planned during a maintenance window.

Why the other options are incorrect:

A. bd is related to blade/platform management, not module provisioning.

C. sshd handles SSH access and is not affected by provisioning changes.

D. httpd supports the Configuration Utility (GUI) and does not restart due to module provisioning.

Therefore, the correct answer is B. tmm.

===========

F5 Support uses a specific scale to categorize the urgency of technical issues, which helps the Control Plane management team prioritize resources effectively.

Severity 1 (Critical): Used for emergency situations where a production site is completely down, or there is a critical impact on business operations with no workaround available.

Severity 2 (High): Assigned when a system is severely degraded, or a primary function is significantly impacted, but the site remains operational in a degraded state.

Severity 3 (Medium): Applicable for issues where there is a partial loss of non-critical functionality, or the system is failing intermittently but the core business is not currently impacted.

Severity 4 (Low): This is the appropriate level for non-critical issues, general "how-to" questions, or maintenance planning. Since the administrator plans to resolve this issue in two weeks, it falls under the category of a low-priority maintenance task that does not require an immediate response from F5 support.

F5 architecture distinguishes between the Data Plane (TMM processing application traffic) and the Control Plane (Linux host processing management tasks). High Control Plane CPU utilization typically points to administrative activities such as heavy GUI usage, complex API calls (iControl), large-scale configuration synchronizations, or intensive logging/monitoring tasks rather than the actual switching or load balancing of application data.

watch-devicegroup-device shows (among other columns) the commit ID (cid.id / shown here as clu_id), the originating device for that commit (cid-orig / shown here as cl_orig), and the time the configuration change was made (cid.time / shown here as cl_time). The highest/newest commit ID and its time represent the most recent configuration change seen among the devices. (clouddocs.f5.com)

bigip_a has the latest configuration (A) because it shows commit ID 3273 at 14:27:00, which is newer than commit ID 1745 at 13:52:34 on bigip_b and bigip_c. (clouddocs.f5.com)

Two devices are out of date (B) because bigip_b and bigip_c are still on the older commit ID 1745, so they do not match the latest commit shown on bigip_a. (clouddocs.f5.com)

Why the other options are not supported by this output:

C is not supported: bigip_c is not showing a newer commit than the others; it’s on the older commit (1745), so it’s not the source of the most recent change. The output’s cid-orig column is what tells you where the change was made. (clouddocs.f5.com)

D/E are incorrect logic: matching cid.time between two devices only indicates they share the same change timestamp/commit, not that it is the correct or latest configuration. The “latest” is indicated by the newest commit ID/time (here, bigip_a). (clouddocs.f5.com)