300-430 Exam Dumps - Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

The primary change to the network when adding APs for location-based services, such as VolMLAN, would be the AP footprint. This refers to the physical coverage area of the access points. Increasing the AP footprint enhances the ability to perform location-based services by improving the accuracy of triangulation and location tracking of devices. This is because a denser AP footprint allows for more precise determination of a device’s location within the network. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, specifically the sections discussing location-based services and AP deployment strategies for optimal coverage and location tracking.

 Link-Local Service (LSS) filtering for mDNS (Multicast Domain Name System) is used to control the propagation of mDNS services across the network. To enable LSS for the AppleTV mDNS service only when ORIGIN is set to Wired, the correct action is to set ORIGIN to Wired and enable LSS specifically for the AppleTV service. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

On a Cisco Catalyst 9800 Series Wireless Controller, the command set that prevents a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational is the fallback-radio-shut command within the FlexConnect profile configuration. This command disables the radios on the AP, thus preventing client connections during Ethernet link failure. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 If all APs are receiving multicast traffic instead of only those that need it, it indicates that Multicast Internet Group Management Protocol (IGMP) snooping is not enabled. IGMP snooping is a feature that allows a network switch to listen to IGMP network traffic and ensure that multicast packets are only sent to the ports associated with interested receivers, thus preventing unnecessary traffic on the network. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

When setting up a new Network Access Device (NAD) on Cisco ISE, it is essential to configure the device’s IP address and the RADIUS shared secret. The device IP address is used to identify the NAD within the network, and the RADIUS shared secret is a password used between the ISE and the NAD to ensure secure communication.

For guests to reach a Web Authentication Redirect page while blocking web management traffic to the controller, guest client HTTPS traffic must be allowed to a specific IP address that does not interfere with management access. The virtual interface IP on a Cisco Wireless LAN Controller serves as a DHCP relay and is used for web authentication processes. Therefore, allowing HTTPS traffic to this IP enables guests to reach the redirect page without granting them access to manage the controller. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

To establish connectivity between a Wireless LAN Controller (WLC) and Cisco’s Connected Mobile Experiences (CMX) through Network Mobility Services Protocol (NMSP), it is essential to enable NMSP on the WLC, which facilitates communication with location-based services like CMX. Additionally, for secure communication, it is necessary to add the MAC address of the Cisco CMX server to the WLC along with its SSC (Self-Signed Certificate) key, ensuring that both devices can authenticate each other and establish a trusted connection. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide