SPLK-2002 Exam Dumps - Splunk Enterprise Certified Architect

According to the Splunk documentation1, multi-site clustering is an indexer cluster that spans multiple physical sites, such as data centers. Each site has its own set of peer nodes and search heads. Each site also obeys site-specific replication and search factor rules. The use cases that are made possible by multi-site clustering are:

Greatly reduce WAN traffic by preferentially searching assigned site (search affinity). This means that if you configure each site so that it has both a search head and a full set of searchable data, the search head on each site will limit its searches to local peer nodes. This eliminates any need, under normal conditions, for search heads to access data on other sites, greatly reducing network traffic between sites2.

Seamlessly route searches to a redundant site in case of a site failure. This means that by storing copies of your data at multiple locations, you maintain access to the data if a disaster strikes at one location. Multisite clusters provide site failover capability. If a site goes down, indexing and searching can continue on the remaining sites, without interruption or loss of data2.

The other options are false because:

Use blockchain technology to audit search activity from geographically dispersed data centers. This is not a use case of multi-site clustering, as Splunk does not use blockchain technology to audit search activity. Splunk uses its own internal logs and metrics to monitor and audit search activity3.

Enable a forwarder to send data to multiple indexers. This is not a use case of multi-site clustering, as forwarders can send data to multiple indexers regardless of whether they are in a single-site or multi-site cluster. This is a basic feature of forwarders that allows load balancing and high availability of data ingestion4.

 The Monitoring Console is the Splunk tool that offers a health check for administrators to evaluate the health of their Splunk deployment. The Monitoring Console provides dashboards and alerts that show the status and performance of various Splunk components, such as indexers, search heads, forwarders, license usage, and search activity. The Monitoring Console can also run health checks on the deployment and identify any issues or recommendations. The btool is a command-line tool that shows the effective settings of the configuration files, but it does not offer a health check. The DiagGen is a tool that generates diagnostic snapshots of the Splunk environment, but it does not offer a health check. The SPL Clinic is a tool that analyzes and optimizes SPL queries, but it does not offer a health check. For more information, see About the Monitoring Console in the Splunk documentation.

Index files (. tsidx files) are the main components of an index that store the raw data and the inverted index of terms. They take the most space in an index, especially if the raw data has many unique terms that increase the size of the inverted index. Bloom filters, source metadata, and sourcetype metadata are much smaller in comparison and do not depend on the number of unique terms in the raw data.

The license_usage.log file is generated and maintained on the License Manager node in a Splunk deployment. This log provides detailed statistics about daily license consumption, including data volume indexed per pool, index, sourcetype, source, and host.

In a distributed or clustered environment (with both search head and indexer clusters), the License Manager acts as the central authority that collects license usage information from all indexers and consolidates it into this log. The License Manager receives periodic reports from each license peer (indexer) and records them in:

$SPLUNK_HOME/var/log/splunk/license_usage.log

The log is automatically indexed into the _internal index with sourcetype=splunkd and can be queried using searches such as:

index=_internal source=*license_usage.log* type="RolloverSummary"

Other components like the Cluster Manager, SHC Deployer, or individual indexers do not store the full consolidated license usage data — they only send summarized reports to the License Manager.

Therefore, the License Manager is the definitive and Splunk-documented location for retrieving and analyzing license_usage.log data across a distributed deployment.

References (Splunk Enterprise Documentation):

• Managing Licenses in a Distributed Environment

• license_usage.log Reference and Structure

• Monitoring License Consumption Using the License Manager

• Splunk Enterprise Admin Manual – License Reporting and Troubleshooting

Splunk Enterprise licensing is based on the amount of data that is ingested and indexed by the Splunk platform per day1. The data that counts against the license is the data that is stored in the indexes that are visible to the users and searchable by the Splunk software2. The indexes that are visible and searchable by default are the main index and any custom indexes that are created by the users or the apps3. The main index is the default index where Splunk Enterprise stores all data, unless otherwise specified4.

Option B is the correct answer because the data for the main index will count against the ingest-based license, as it is a visible and searchable index by default. Option A is incorrect because the summary index is a special type of index that stores the results of scheduled reports or accelerated data models, which do not count against the license. Option C is incorrect because the _metrics index is an internal index that stores metrics data about the Splunk platform performance, which does not count against the license. Option D is incorrect because the _introspection index is another internal index that stores data about the impact of the Splunk software on the host system, such as CPU, memory, disk, and network usage, which does not count against the license.

The Splunk Capacity Planning Manual defines the total required storage for indexes as a function of daily ingest rate, compression factor, retention period, and an additional padding buffer for index management and growth.

The formula is:

Storage = (Daily Data * Compression Factor * Retention Days) + Padding

Given the values:

Daily rate = 20 GB

Compression factor = 0.5 (50% reduction)

Retention period = 30 days

Padding = 100 GB

Plugging these into the formula gives:

20 * 0.5 * 30 + 100 = 400 GB

This result represents the estimated storage needed to retain 30 days of compressed indexed data with an additional buffer to accommodate growth and Splunk’s bucket management overhead.

Compression factor values typically range between 0.5 and 0.7 for most environments, depending on data type. Using compression in calculations is critical, as indexed data consumes less space than raw input after Splunk’s tokenization and compression processes.

Other options either misapply the compression ratio or the order of operations, producing incorrect totals.

References (Splunk Enterprise Documentation):

• Capacity Planning for Indexes – Storage Sizing and Compression Guidelines

• Managing Index Storage and Retention Policies

• Splunk Enterprise Admin Manual – Understanding Index Bucket Sizes

• Indexing Performance and Storage Optimization Guide

The following may explain the problem of why a colleague cannot see the src_ip field in their search results: The field was extracted as a private knowledge object, and the colleague did not explicitly use the field in the search and the search was set to Fast Mode. A knowledge object is a Splunk entity that applies some knowledge or intelligence to the data, such as a field extraction, a lookup, or a macro. A knowledge object can have different permissions, such as private, app, or global. A private knowledge object is only visible to the user who created it, and it cannot be shared with other users. A field extraction is a type of knowledge object that extracts fields from the raw data at index time or search time. If a field extraction is created as a private knowledge object, then only the user who created it can see the extracted field in their search results. A search mode is a setting that determines how Splunk processes and displays the search results, such as Fast, Smart, or Verbose. Fast mode is the fastest and most efficient search mode, but it also limits the number of fields and events that are displayed. Fast mode only shows the default fields, such as _time, host, source, sourcetype, and _raw, and any fields that are explicitly used in the search. If a field is not used in the search and it is not a default field, then it will not be shown in Fast mode. The events are tagged as communicate, but are missing the network tag, and the Typing Queue, which does regular expression replacements, is blocked, are not valid explanations for the problem. Tags are labels that can be applied to fields or field values to make them easier to search. Tags do not affect the visibility of fields, unless they are used as filters in the search. The Typing Queue is a component of the Splunk data pipeline that performs regular expression replacements on the data, such as replacing IP addresses with host names. The Typing Queue does not affect the field extraction process, unless it is configured to do so

Search is not locked out when a customer has installed a 500GB Enterprise license and a 300GB, no enforcement license on the same license master. The no enforcement license allows the customer to exceed the license quota without locking search, but violations are still recorded. The customer can ingest up to 800GB of data per day without violating the license, but if they ingest more than that, they will incur a violation. However, the violation will not lock search, as the no enforcement license overrides the enforcement policy of the Enterprise license. For more information, see [No enforcement licenses] and [License violations] in the Splunk documentation.