OGEA-102 Exam Dumps - TOGAF Enterprise Architecture Part 2 Exam (English)

According to the TOGAF standard, the Target Architecture is the description of a future state of the architecture being developed for an organization. It should be aligned with the Architecture Vision, Principles, and Requirements that have been agreed with the stakeholders. To address the incompatibilities between key stakeholder preferences, the TOGAF standard recommends creating and evaluating multiple alternative Target Architectures that meet different sets of criteria. These criteria should reflect the value preferences and priorities of the stakeholders, as well as the business drivers and objectives. The alternative Target Architectures should be illustrated using a set of architecture views that show the impact of each alternative on the business, data, application, and technology domains. The impact on planned projects should also be identified and analyzed. The strengths and weaknesses of each alternative should be understood and documented. A formal stakeholder review should then be conducted to decide which alternative is the most fit for purpose and should be moved forward with. The funding required for implementing the chosen alternative should also be determined and secured. References:

The TOGAF Standard, Version 9.2 - Phase B: Business Architecture - The Open Group

The TOGAF Standard, Version 9.2 - Phase C: Information Systems Architectures - The Open Group

[The TOGAF Standard, Version 9.2 - Phase D: Technology Architecture - The Open Group]

[The TOGAF Standard, Version 9.2 - Phase E: Opportunities and Solutions - The Open Group]

[The TOGAF Standard, Version 9.2 - Phase F: Migration Planning - The Open Group]

A is the best answer because the scenario has already completed the architecture definition work, agreed the migration strategy, identified work packages, and defined intermediate architectural states. The appropriate ADM focus is therefore Phase F: Migration Planning. Phase F finalizes the Architecture Roadmap and the Implementation and Migration Plan by coordinating architecture work with the enterprise’s existing change mechanisms, including business planning, portfolio/project management, and operations management. The plan must be realistic within the enterprise change portfolio, must consider dependencies and resources, and must assign business value to work packages so that implementation projects can be selected and sequenced. B contains a valid technique, but it is narrower than the TOGAF Phase F responsibility because it focuses mostly on ROI and increments rather than alignment with the enterprise’s change portfolio. C describes Phase G Implementation Governance, which occurs after implementation projects are underway. D mixes deliverable maintenance, governance modeling, and lessons learned but does not address migration planning as the next step. The most complete response is therefore to align the migration plan with management frameworks, value the work packages, and select the implementation projects. References: ADM Phase F, Migration Planning; Implementation and Migration Plan; Architecture Roadmap; work packages; Transition Architectures.

At this stage in the scenario:

A strategic architecture has been completed.

All divisions have completed their Architecture Definition Documents.

Work packages have been defined.

Transition Architectures between Baseline and Target are already identified.

A draft roadmap exists for a multi-year phased migration.

You are now asked to plan the next steps for the migration, which aligns exactly with TOGAF ADM Phase F: Implementation and Migration Planning.

In Phase F, TOGAF prescribes the following key activities:

Evaluate and prioritize projects and work packages

Determine business value, cost, risk, dependencies

Confirm Transition Architectures and sequencing

Update and finalize the Implementation & Migration Plan

Option B is the ONLY answer that correctly follows these required TOGAF steps.

✔ Why Option B is correct

Option B states:

“Estimate the business value for each project by applying the Business Value Assessment Technique … to prioritize the migration projects.”✔ This is a TOGAF-recommended technique specifically for Phase F to evaluate and prioritize transformations using value, risk, and ROI.

“Confirm and plan a series of Transition Architecture phases … using a table of Architecture Definition Increments.”✔ Exactly aligned with TOGAF:

Transition Architectures were identified earlier.

In Phase F, they must be confirmed, sequenced, and documented.

“Update the Implementation and Migration Plan.”✔ This is the required output of ADM Phase F.✔ At this point, the plan must be validated and finalized based on value and prioritization.

Thus, Option B directly matches TOGAF’s prescribed migration planning process.

✘ Why the other options are incorrect

A – Incorrect

Suggests finalizing Architecture Definition documentation—this was already completed by each division.

Introduces an “Implementation Governance Model,” which is not a TOGAF artifact at this stage.

Focuses on lessons learned BEFORE execution, which is not appropriate for migration planning.

C – Incorrect

Focuses only on project selection and resource assignment.

Does not use TOGAF techniques for value/risk evaluation.

Does not reference Transition Architectures, which are central in the scenario.

Oversimplifies Implementation & Migration Planning to resource scheduling.

D – Incorrect

Compliance Assessments occur DURING execution, not before migration planning.

At this stage, no implementation has started, so compliance reviews are premature.

Adjusting performance requirements now has no alignment with TOGAF’s ADM sequence.

Key aspects of the scenario:

Business Objective:

A merger is happening to combine offerings, reduce costs, and achieve operational efficiency.

The goal includes fully integrating retail operations and systems, replacing duplicated systems, and reducing the number of applications used.

Technological Improvements:

A central AI-based inventory system is in place.

Hand-held devices for stores have improved customer and staff satisfaction and increased efficiency.

Scope of Architecture Work:

Integrating the merged systems.

Managing retail architecture to optimize operations.

TOGAF Alignment:

TOGAF principles aim to ensure the architecture supports business transformation effectively while aligning with governance and best practices.

Best answer analysis:

Option 1:

Maximize Benefit to the Enterprise: Aligns with the merger goals of cost reduction and efficiency.

Common Use Applications: Matches the goal to reduce duplicated systems.

Data is an Asset: Central AI system depends on accurate and reliable data.

Responsive Change Management: Necessary to support the transition and manage organizational impacts.

Technology Independence: Encourages selecting flexible, scalable solutions post-merger.

This option comprehensively aligns with the scenario.

Option 2:

Control Technical Diversity: Important but less emphasized than cost reduction and application unification.

Interoperability: Relevant, but less critical compared to principles addressing business value.

Data is an Asset: Relevant.

Data is Shared: Implied in centralized inventory but not directly stated.

Business Continuity: Important but not the main focus here.

This option partially fits but lacks emphasis on business outcomes.

Option 3:

Common Vocabulary and Data Definitions: Indirectly helpful but not central to the transformation.

Compliance with the Law: Always critical, but no explicit legal issues are mentioned.

Requirements-Based Change: General principle but not transformation-specific.

Responsive Change Management: Relevant.

Data Security: Important but not a central concern in the scenario.

This option focuses more on governance and less on merger goals.

Option 4:

Common Use Applications: Relevant to reducing duplicate systems.

Data is an Asset: Relevant.

Data is Accessible: Fits with AI system and handheld devices but is a subset of " Data is an Asset. "

Ease of Use: Relevant to handheld devices but not a core transformation principle.

Business Continuity: Important but secondary to cost and efficiency.

This option focuses more on usability and accessibility rather than transformation objectives.

The best answer is C. You would hold a series of interviews at each of the manufacturing plants using the business scenarios technique. This will allow you to understand the systems and integrations with local partners. You would use stakeholder analysis to identify key players in the engagement, and to understand their concerns. You will then identify and document the key high-level stakeholder requirements for the architecture. You will then generate high level definitions of the baseline and target architectures.

This answer is based on the TOGAF standard, which recommends the following steps to initiate the architecture project1:

Establish the architecture project

Identify stakeholders, concerns, and business requirements

Confirm and elaborate business goals, business drivers, and constraints

Evaluate business capabilities

Assess readiness for business transformation

Define scope

Confirm and elaborate Architecture Principles, including business principles

Develop Architecture Vision

Define the Target Architecture value propositions and KPIs

Identify the business transformation risks and mitigation activities

Secure stakeholder and sponsor approval

The answer C covers most of these steps, by using the business scenarios technique to elicit and validate the business requirements, goals, drivers, and constraints, as well as the current and future states of the architecture2. The answer C also uses stakeholder analysis to identify and engage the key stakeholders, and to address their concerns and expectations3. The answer C also generates high level definitions of the baseline and target architectures, which can be used to develop the Architecture Vision and the value propositions4.

The other answers are not the best approach for architecture development, because:

Answer A focuses on researching vendor literature and conducting briefings with vendors, which is not the best way to understand the business needs and the current situation of the enterprise. Answer A also defines a preliminary Architecture Vision without involving the stakeholders or validating the requirements, which may lead to misalignment and lack of consensus.

Answer B conducts a pilot project that will enable vendors to demonstrate potential solutions, which is premature and costly at this stage of the architecture project. Answer B also does not address the stakeholder concerns or the current systems and integrations, which may result in gaps and risks. Answer B also develops the requirements after the pilot project, which may not reflect the actual business needs and goals.

Answer D develops baseline and target architectures for each of the manufacturing plants, which may not consider the enterprise-wide perspective and the potential benefits of a common ERP system. Answer D also does not involve the stakeholders or address their concerns, which may result in resistance and conflict. Answer D also does not define the business case or the performance metrics, which are essential for demonstrating the value and feasibility of the architecture.

1: The TOGAF Standard, Version 9.2 - Architecture Vision 2: The TOGAF Standard, Version 9.2 - Business Scenarios 3: [The TOGAF Standard, Version 9.2 - Stakeholder Management] 4: [The TOGAF Standard, Version 9.2 - Architecture Definition Document]