OGEA-101 Exam Dumps - TOGAF Enterprise Architecture Part 1 Exam (English)

Comprehensive and Detailed Explanation From documents:

In TOGAF, a Business Scenario is an ADM technique used to capture and structure business requirements in a way that directly informs the development and validation of architectures. It frames a specific business problem (or opportunity) and articulates the desired outcomes/objectives, along with the business and technical context, the involved actors and roles (human and system), and the measures of success. This makes option A correct because it concisely captures the essence of a Business Scenario: a well-defined business problem coupled with the outcomes the business seeks to achieve.

A good Business Scenario typically includes:

The business problem/opportunity and drivers.

The business and technical environment/context in which the problem exists.

The desired outcomes/objectives and measures of success (how success will be recognized).

Actors and roles (both human and system) and their interactions.

Capabilities and high-level requirements implied by the scenario.

Business Scenarios are especially valuable in Phase A: Architecture Vision to validate scope, objectives, and business value, and they continue to be used throughout Phases B–D to test and validate the target architectures and to maintain requirements traceability via Requirements Management. They promote shared understanding among stakeholders and provide a concrete basis for evaluating solution options and assessing architecture fitness-for-purpose.

Why the other options are incorrect:

B. A use-case for developing a business model. While Business Scenarios and use-cases are related, a Business Scenario is broader. It provides context, problem, objectives, and measures of success; use-cases are often derived from or complement Business Scenarios to specify interactions, but a Business Scenario is not merely a use-case.

C. A method to quantify readiness for change. This describes Business Transformation Readiness Assessment, a separate TOGAF technique used to gauge an organization’s readiness to execute change. It is not what TOGAF defines as a Business Scenario.

D. A technique to identify differences between a baseline and a target architecture. That is Gap Analysis, another distinct ADM technique used to determine what needs to change to move from the current state to the desired future state.

References (official TOGAF materials; no links):

The Open Group, TOGAF® Standard, Version 9.2, Part III: ADM Guidelines & Techniques — Business Scenarios; also Requirements Management, and Phase A: Architecture Vision (Part II) for where Business Scenarios are applied.

The Open Group, TOGAF® Series Guide: Business Scenarios — definition, structure, and usage of Business Scenarios across the ADM.

The Open Group, TOGAF® 9 Foundation Study Guide (latest edition) — coverage of Business Scenarios as an ADM technique and their relationship to use-cases.

The Open Group, TOGAF® 9 Certified Study Guide (latest edition) — contrasts with related techniques (Gap Analysis; Business Transformation Readiness Assessment) and explains use within Phase A and Requirements Management.===========

The statement "Projects may cycle between ADM phases, in planned cycles covering multiple phases" illustrates the concept of iteration, which is the process of repeating the ADM phases or steps within a phase to refine the architecture outputs and address the changing requirements and stakeholder concerns. Iteration can occur at different levels of granularity and scope, such as within a single phase, across multiple phases, or across the entire ADM cycle. Iteration can also be applied to different architecture domains, such as business, data, application, and technology. Iteration is a key feature of the ADM that enables the development of architectures that are fit for purpose, adaptable, and responsive to change. References: : The TOGAF Standard, Version 9.2, Part III: ADM Guidelines and Techniques, Chapter 24: Applying Iteration to the ADM

According to the TOGAF Standard, Version 9.2, the ADM phases and their objectives are as follows1:

Preliminary Phase: To prepare and initiate the architecture development cycle, including defining the architecture framework, principles, and governance.

Phase A: Architecture Vision: To define the scope, vision, and stakeholders of the architecture initiative, and to obtain approval to proceed.

Phase B: Business Architecture: To describe the baseline and target business architecture, and to identify the gaps between them.

Phase C: Information Systems Architectures: To describe the baseline and target data and application architectures, and to identify the gaps between them.

Phase D: Technology Architecture: To describe the baseline and target technology architecture, and to identify the gaps between them.

Phase E: Opportunities and Solutions: To identify and evaluate the opportunities and solutions for implementing the target architecture, and to define the work packages and transition architectures.

Phase F: Migration Planning: To finalize the implementation and migration plan, and to ensure alignment with the enterprise portfolio and project management.

Phase G: Implementation Governance: To provide architecture oversight and guidance for the implementation projects, and to manage any architecture change requests.

Phase H: Architecture Change Management: To monitor the changes in the business and technology environment, and to assess the impact and performance of the architecture.

Requirements Management: To manage the architecture requirements throughout the ADM cycle, and to ensure alignment with the business requirements.

Based on the above definitions, we can match each objective with the corresponding phase as follows:

Objective 1: Ensure that the business value and cost of work packages and transition architectures is understood by key stakeholders. This objective is achieved in Phase H: Architecture Change Management, where the value realization and cost-benefit analysis of the architecture are performed2.

Objective 2: Ensure conformance with the Target Architecture by implementation projects. This objective is achieved in Phase F: Migration Planning, where the conformance requirements and criteria for the implementation projects are defined3.

Objective 3: Ensure that the architecture development cycle is maintained. This objective is achieved in Phase F: Migration Planning, where the architecture roadmap and iteration cycle are maintained3.

Objective 4: Ensure that the Architecture Governance Framework is executed. This objective is achieved in Phase G: Implementation Governance, where the architecture governance processes and procedures are applied to the implementation projects4.

1: The TOGAF Standard, Version 9.2, Chapter 5: Architecture Development Method (ADM)

2: The TOGAF Standard, Version 9.2, Chapter 21: Architecture Change Management

3: The TOGAF Standard, Version 9.2, Chapter 20: Migration Planning

4: The TOGAF Standard, Version 9.2, Chapter 19: Implementation Governance

According to the TOGAF Standard, 10th Edition, documents which are under development and have not undergone any formal review and approval process are called draft documents, while documents which have been reviewed and approved are called approved documents 1. Draft documents are typically marked with a version number of 0.x, indicating that they are incomplete or provisional. Approved documents are typically marked with a version number of 1.0 or higher, indicating that they have been finalized and authorized. The other options are not correct, as they are not the terms used by the TOGAF Standard to distinguish between documents under development and documents that have been reviewed and approved. The terms “finalized”, “concept”, “deliverable”, and “Version 0.1” and “Version 1.0” are not specific to the TOGAF Standard, and they may have different meanings or interpretations in different contexts. References: 1: TOGAF Standard, 10th Edition, Part II: Architecture Development Method, Chapter 7: Applying Iteration to the ADM, Section 7.2.3 Document Categorization.

Gap Analysis is a technique that compares the Baseline Architecture and the Target Architecture to identify the differences and gaps between them. The purpose of this technique is to determine the changes and additions that are required to achieve the desired future state of the architecture. One of the main aspects of Gap Analysis is to identify the functions that are missing or overlapping in the current and future architectures, and to plan how to address them. This helps to ensure that the architecture is complete, consistent, and aligned with the business objectives and requirements3

Architecture partitioning is not the same as architecture levels (so 1 is incorrect).

It allows different teams of architects to work on different parts of the architecture in parallel (2 is correct).

TOGAF does not prescribe a fixed partitioning model; it provides guidance (so 3 is incorrect).

Partitioning is used to simplify management of Enterprise Architecture in large or complex organizations (4 is correct).

The Architecture Landscape is divided into levels known as Segment Strategic and Capability Architectures. These levels correspond to different scopes and purposes of architectures within an enterprise. Segment Architectures are architectures that address specific business units, functions, or processes within an enterprise. Strategic Architectures are architectures that provide a high-level view of the enterprise’s vision, goals, and direction. Capability Architectures are architectures that address specific business capabilities or services that span multiple segments or domains. Reference: The TOGAF® Standard | The Open Group Website, Section 2.4 Architecture Repository.

Risk is defined as the effect of uncertainty on objectives, according to the ISO 31000 standard, which provides principles and guidelines for risk management1 Risk can be positive or negative, depending on whether the uncertainty affects the achievement or the failure of the objectives. Risk can also be expressed in terms of likelihood and impact, which indicate the probability and the consequence of the risk occurrence. Risk management is the coordinated activities to direct and control an organization with regard to risk. Risk management is an integral part of the TOGAF standard, as it helps to identify, assess, and treat the risks that may affect the architecture development and implementation2 References: 1: ISO 31000:2018, Risk management — Guidelines, Clause 3.1 2: The TOGAF Standard, Version 9.2, Part III: ADM Guidelines and Techniques, Chapter 32: Risk Management