Which two characteristics would you consider when selecting spine devices in an IP fabric?
(Choose two.)
Which protocol is used between VCF member devices to create a loop-free topology?
A customer wants to connect two data centers on different subnets using EVPN. What are two implications of using different IP subnets at each site? (Choose two.)
What are two streaming data formats supported for network analytics? (Choose two.)
Referring to the exhibit,
what happens when you initiate ZTP on a QFX5120 switch running Junos
21.3R1.9?
You are configuring VXLAN. and you must ensure that all switches for the multicast groups
advertise their existence and learn about other VTEPs In this scenario. which protocol will accomplish this task?
You want to enable an EBGP-based IP fabric to allow ECMP routes to be populated into the RIB. In this scenario, which action will accomplish this task?
Referring to the exhibit, you must advertise the Io0.12 interface as a type-5 route.
Which configuration parameter would be used to accomplish this task?
A VXLAN has been created between devices leaf1 and Ieaf3.
Referring to the exhibit, which statement is true?
What are three functions supported by the Contrail Command user interface?
Referring to the exhibit,
you have a data center in which only the spine devices are using EVPN and VXLAN. The leaf nodes are multihomed in active-active mode to the spine nodes through ESI LAG interfaces. In this design, a link failure on the interface connecting the spine nodes would also cause all traffic from the spine to the leaf nodes to drop.
In this scenario, which command configured on which nodes would solve this problem?
You have successfully deployed an IP fabric in your data center. However, your server team complains that they are not seeing an increase in performance as expected. After examining the routing and forwarding tables, you notice that only a single route is listed to each destination in the forwarding table, even though there are multiple routes shown in the routing table.
In this scenario, what should you do to solve the problem?
The configuration shown in the exhibit is intended to set up assisted replication but will not
commit. Which action will create a valid configuration in this situation?
You have deployed a multitenant EVPN-VXLAN fabric. You must have the routes in the BLUE VRF show up in the RED VRF.In this scenario, how would you achieve this goal?
You want to ensure high availability of the Junos devices in your data center. In this scenario, which three features would accomplish this task? (Choose three.)
Which three statements are correct about multitenancy in a Junos EVPN environment? (Choose three.)
You are asked to design a deployment plan for a large number of QFX Series switches using
ZTP. The ZTP deployment plan must ensure all switches are configured with their designated configuration file.
Which DHCP option and subscription combination would be used to accomplish this task?
You want to monitor the value of a MIB object or variable against configured thresholds and generate a corresponding event when the value of a variable crosses a threshold.
In this scenario, which feature should you use to accomplish this task?
Your colleague has begun working on the base configuration for an active-active multihomed
EVPN connection shown in the exhibit.
Which two actions will ensure a successful implementation? (Choose two.)
You have a data center design with multiple tenants using routing instances.
In this scenario, what are two ways to provide inter-tenant communications? (Choose two.)
You are building an IP fabric underlay for your data center. You are asked to ensure that the two spine devices are in the same AS (65000) while the six leaf devices are in a different AS (65512). In this scenario, which two statements are correct by default? (Choose two.)
You are asked to enable plug-and-play line card switches in an active VCF without making any future Junos configuration charges. You are also required to ensure that all new line card are automatically upgrade to the correct Junos version without any manual intervention. In this scenario, which two actions will accomplish this task? (Choose two.)
You have configured a new MC-LAG connection to a host. After committing the configuration, the
MC-LAG link is not functioning properly.
Referring to the exhibit, how would you solve this problem?
You administer an EVPN-VXLAN fabric. You notice that there is no VXLAN traffic forwarding through the network.
Referring to the exhibit, which modification will solve the problem?
A VXLAN adds 50 to 54 bytes of extra header information to an Ethernet frame. In this scenario,
how would you accommodate this increased?
You are creating a new EVPN and are asked to selectively accept certain MAC advertisement routers from your EVPN peers using VXLAN Encapsulation.
Which statements is correct in this scenario?
When considering VRF routing-instances for network segmentation, which two statements are
true? (Choose two.)
You are asked to deploy an Ethernet bridging design in a data center with the following criteria:
-routing must occur on the leaf devices.
-VTEPs must terminate on the leaf devices.
-facilitate inter-VLAN communication.
-lower latency with East-West traffic.
Which architecture should you use in this scenario?
An EVPN-signaled VXLAN overlay has been deployed in the network shown in the exhibit. Host1
is a bare metal server, and is dual-homed to the network. The IP addresses 10.1.1.1/24 and 10.1.1.2/24 are assigned to the same physical NIC, and no virtualization is configured on the server.
In this scenario, which two statements are true? (Choose two.)
You are designing a network for a small data center. In this scenario, which underlay protocol
allows for the simplest implementation?
Which two statements describe EVPN based VXLAN implementations? (Choose two.)
Which two statements about the seamless EVPN-VXLAN stitching data center interconnect architecture are correct? (Choose two.)
Exhibit.
You choose the EBGP fabric design as shown in the exhibit. In addition to a load-balancing policy, you want to ensure that the 10.1/16 prefix is sent to the leaf nodes.
Which two commands on the spine will accomplish this task? (Choose two.)
Which feature permits granular control of per-VNI type-2 and EVPN type-3 routes across an entire overlay network?
Referring to the exhibit, each node in the IP fabric is peering to its directly attached neighbor
using EBGP. Each node is peering using physical interface IP addresses. Leaf 2 and Leaf 3 are advertising the 10.1.1/24 network into EBGP. Spine 2 must be configured so that it can load- share traffic destined to the 10 1.1/24 network over both next-hop A and next-hop B.
Which two actions must be performed to accomplish this task? (Choose two.)
You have deployed two data centers that require a Layer 2 stretch between host1 and host2.
Referring to the exhibit, what does a Layer 2 stretch require?