Black Friday Countdown: 75% Off Exam Bundles! Use coupon code below before time runs out! - Ends in 0d 00h 00m 00s - Coupon code: 75vsure

HPE7-A12 Exam Dumps - HPE Network Data Center Professional Architect Exam

Searching for workable clues to ace the HP HPE7-A12 Exam? You’re on the right place! ExamCert has realistic, trusted and authentic exam prep tools to help you achieve your desired credential. ExamCert’s HPE7-A12 PDF Study Guide, Testing Engine and Exam Dumps follow a reliable exam preparation strategy, providing you the most relevant and updated study material that is crafted in an easy to learn format of questions and answers. ExamCert’s study tools aim at simplifying all complex and confusing concepts of the exam and introduce you to the real exam scenario and practice it with the help of its testing engine and real exam dumps

Go to page:
Question # 9

You are selecting switches for a new rack that must support several traffic types, including HTTPS multicast streaming and iSCSI traffic. You are deciding between the CX 8360v2-32Y6C and CX 8325-48Y8C models, both of which satisfy the rack’s port requirements.

Which technical requirement should lead you toward the 8325 model?

A.

A requirement to route the multicast traffic across multiple subnets

B.

A requirement to support a mix of 10GbE and 25GbE server connections

C.

A requirement to allocate two different specific amounts of buffer space to platinum-tier and to gold-tier iSCSI storage

D.

A requirement to support both IP ECN AND PFC

Full Access
Question # 10

Match each switch family to its capability.

Full Access
Question # 11

What is one advantage of using a VSX pair rather than two discrete switches to connect servers, storage, firewalls, and other workloads?

A.

You only need to configure a single routing control-plane.

B.

The setup is much easier since both switches are sharing the same configuration.

C.

Bare metal servers can be connected via MLAGs using LACP.

D.

You can save half the number of licenses needed for AFC.

Full Access
Question # 12

You are designing a pair of CX switches to function as ToR switches. The switches use VSX in a data-center Layer 2 topology and connect to the core through VSX LAGs. To satisfy expansion requirements, you must keep as many ports available as possible.

Which option should you recommend for VSX keepalives?

A.

Sending the keepalives to and from loopback interfaces over the uplinks to the core.

B.

Adding a link between the switches dedicated to the keepalives.

C.

Sending the keepalives to and from loopback interfaces over the VSX ISL.

D.

Using the OOBM interface to transmit keepalives.

Full Access
Question # 13

Refer to the rack requirements in the scenario. What additional information would help you select between the CX 8325-48Y8C and CX 8360-48Y6C models?

A.

How the rack and switches installed in it are oriented toward hot and cold aisles.

B.

Whether the customer requires the flexibility to extend VM networks across a routed underlay.

C.

Precisely how many ports use 10 GbE versus 25 GbE and whether that mix might change.

D.

Whether the customer has a preference for AOC versus DAC cables.

Full Access
Question # 14

Waratah Hospital, located in Australia, plans to move many data center services to a new facility. (The remaining legacy data center is not included in this project.) Waratah Hospital engaged an external consultant to help with the new data center network design.

Based on the data center network-infrastructure requirements, the external consultant has produced a high-level design. The following summarizes the design document’s contents.

Requirements and information:

Six racks in the data center room (a single row).

Redundant Top of Rack leaf switches with back-to-front cooling in every rack, delivering 10/25 Gbps connectivity to servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the back of the racks (hot aisle).

OOB management for servers, storage, and network must be delivered through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building with links providing 400 Gbps.

Internet access is provided through an existing firewall cluster with two firewalls, with each firewall in one data room. The second firewall operates in standby mode, and VRRP is used on the firewalls for failover. The data center network must connect to these firewalls with links totaling 100 Gbps.

The external link is a dark-fiber direct link based on single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year with close to zero downtime.

All life-critical resources are accessed locally, and all resources are within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mix of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

In the past, the hospital experienced a security breach that caused data loss, network downtime, and identity theft.

Refer to the scenario. You have learned that the customer must extend two VRFs between the new data center network and the firewall. To meet the scenario requirements and general best practices, what should you recommend for connecting border leaf switches to the hospital core?

A.

One VSX LAG to each firewall consisting of 25 GbE links on the border leaf switches, two SVIs on each LAG.

B.

One 100 GbE link between border leaf switch 1 and the active firewall. One 100 GbE link between border leaf switch 2 and the passive firewall. Two subinterfaces on each link that act as ROPs.

C.

2x 25 GbE routed only ports between border leaf switch 1 and the active firewall. 2x 25 GbE routed only ports between border leaf switch 2 and the passive firewall.

D.

One VSX LAG that includes a full mesh of 25 GbE links between the border leaf switches and firewall cluster, two SVIs on the LAG.

Full Access
Question # 15

Can EVPN/VXLAN fabrics be configured to provide protection against Layer 2 loops?

A.

No, a Layer 2 loop on VXLAN Infrastructure is not possible.

B.

Yes, using Spanning-Tree over VXLAN

C.

No, AOS-CX does not support such capability.

D.

Yes, using Loop Protection over VXLAN.

Full Access
Question # 16

A customer operates a highly virtualized data center for which you are designing a two-tier Layer 2 data center.

What are the characteristics of a design that extends VLANs only to the ToR switches and server ports that strictly require those VLANs? Choose two.

A.

smaller MAC address tables at the access switches

B.

smaller routing table on core switches

C.

more flexibility for server admins

D.

more control for network admins

E.

smaller ARP tables on the core switches

Full Access
Go to page: