Exact Extract — Core-Network Architecture
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.â€
— Huawei 5G Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
Huawei SPS supports Diameter signalling interworking, allowing it to connect with legacy and converged signalling network elements. When configuring interconnection with a Diameter peer, several configuration objects are required.
A. `ADD IPADDR`: Configures the IP address resources associated with the signalling entity. These IP addresses provide the transport-layer connectivity required for the signalling connection.
B. `ADD DMLNK`: Creates an individual Diameter signalling link. The link configuration includes the relevant local and remote signalling connection parameters.
C. `ADD DMLKS`: Creates a Diameter link set. Link sets organize one or more Diameter connections and allow signalling traffic to be managed according to the relevant routing and link-selection policies.
D. `ADD DMPEER`: Creates a Diameter peer definition. This defines the remote Diameter node and its relevant identity information, including host and realm attributes.
A typical configuration sequence establishes the local IP resources, defines the peer, creates the Diameter link set, and then configures the corresponding signalling links. Huawei SPS Diameter configuration training identifies ADD DMPEER , ADD DMLKS , and ADD DMLNK as the relevant peer-interconnection commands.
From an operational perspective, correct configuration alone does not prove successful interconnection. Engineers must also validate transport reachability, peer identity consistency, Diameter capability exchange, and link status. Therefore, all four options are correct.