Exact Extract — Huawei E9600 and E6600 Series Products and Industry Applications Introduction, Page 4
“Maximum single-fiber capacity: 48T, 60 wavelengths x 800G@100 GHzâ€
Additional Training Reference — Page 8
The E9612 optical-layer architecture identifies a Super C-band configuration supporting 120 wavelengths at 50 GHz or 80 wavelengths at 75 GHz.
Technical Deep Dive:
The Huawei OptiXtrans E9600 series is designed for high-capacity enterprise optical transport networks requiring extensive wavelength multiplexing and high-speed coherent transmission.
System capacity is determined by multiplying the number of available wavelength channels by the transmission rate assigned to each channel.
For the configuration described in the question:
80 × 600 Gbit/s = 48,000 Gbit/s = 48 Tbit/s
Therefore, 80 wavelengths operating at 600 Gbit/s each produce an aggregate capacity of 48 Tbit/s.
Huawei ' s Super C-band architecture supports high-density wavelength multiplexing and programmable optical transmission rates.
However, the number of usable wavelengths depends on channel spacing, optical spectrum width, transceiver capabilities, and the selected modulation format.
A 600G coherent channel typically requires a different combination of modulation order, symbol rate, and optical signal quality than a lower-rate coherent channel.
Huawei ' s training explicitly specifies an alternative 48 Tbit/s configuration using 60 wavelengths at 800 Gbit/s with 100 GHz spacing.
This also yields:
60 × 800 Gbit/s = 48 Tbit/s
Technical Conclusion: A is the intended answer, and the stated aggregate-capacity calculation is correct.
Technical qualification: The uploaded training directly verifies the 48 Tbit/s maximum but specifies 60 × 800G, not 80 × 600G, as its reference configuration. The latter combination is arithmetically consistent and compatible with the described 80-channel spectrum concept, but its exact product support must be established from the relevant board and optical-system specifications.