Summer Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: v4s65

DU0-001 Exam Dumps - Data Center University Associate Certification

Question # 4

What is the difference between an undervoltage and a sag?

A.

A sag lasts less time than an undervoltage condition.

B.

A sag has less of a voltage drop than an undervoltage condition.

C.

A sag is due to downstream loads and undervoltage is due to the power source.

D.

A sag occurs in low voltage distribution and undervoltage occurs in high voltage distribution.

Full Access
Question # 5

Planned downtime is necessary for many data centers. management tools that ignore planned downtime can have which consequence?

A.

Spurious alerts leading to incorrect actions by personnel

B.

Insufficient runtime specifications for blade server deployments

C.

Downtime that can result from individual components failing

D.

Reduction in the training and knowledge that is necessary to maintain the NCPI system

Full Access
Question # 6

In order to determine the exact level of redundancy available in the cooling system, which cooling architecture would require CFD analyses of every combination of system failures within the data center?

A.

Row

B.

Rack

C.

Room

D.

Ceiling

Full Access
Question # 7

What are three characteristics of a water mist suppression system? (Choose three.)

A.

Requires manual activation

B.

Uses minimal storage space

C.

Discharges very fine water droplets

D.

Is popular in industrial environments

E.

Extinguishes fire by absorbing oxygen

Full Access
Question # 8

Which type of humidification system rapidly vibrates water to create a fog or mist that is introduced into the air?

A.

Infrared humidifier

B.

Ultrasonic humidifier

C.

Electromagnetic humidifier

D.

Steam canister humidifier

Full Access
Question # 9

Which three timeframes are included in MTTR? (Choose three.)

A.

The time to repair the system

B.

The time to diagnose a failure

C.

The time to assess the financial impact

D.

The time to write the failure resolution report

E.

The time to get the service technician onsite

Full Access
Question # 10

What does the term "5-nines" availability mean?

A.

5 minutes of downtime per year

B.

9 minutes of downtime per year

C.

14 minutes of downtime per year

D.

45 minutes of downtime per year

Full Access
Question # 11

What is most critical for an aircraft that is in flight?

A.

Reliability

B.

Availability

C.

Manageability

D.

Maintainability

Full Access
Question # 12

Which is an example of a rack-oriented cooling architecture?

A.

A cooling unit is located in the ceiling plenum to cool the data center racks.

B.

A cooling unit is located within the rack itself to cool the contents of that rack.

C.

A cooling unit utilizes perforated raised floor tiles to deliver cool air to the rack.

D.

A cooling unit is located along the perimeter wall of the data center to cool a specific zone of racks.

Full Access
Question # 13

What is the primary purpose of a UPS?

A.

To remove transients from the power path

B.

To detect and report power factor problems

C.

To provide battery backup power should the utility fail

D.

To convert from three-phase power to Single-phase power

Full Access
Question # 14

When monitoring humidity levels in the data center, where is the single most important place to measure the humidity?

A.

Above the rack

B.

Below the rack

C.

The air intake on IT equipment

D.

The exhaust air coming out of the back of the IT equipment

Full Access
Question # 15

What is the correct order of the refrigeration cycle datacenter precision cooling?

A.

Condensation > evaporation > expansion > compression

B.

Compression > condensation > evaporation > expansion

C.

Evaporation > expansion > condensation > compression

D.

Evaporation > compression > condensation > expansion

Full Access
Question # 16

A UPS system consists of three modules in a parallel redundant configuration. Each module is rated to provide 200 kW of power. If the electrical load grows from 350 kW to 420 kW, what will happen?

A.

The UPS system will not provide any additional power beyond 400 kW.

B.

The UPS system will reach an overload state and switch to its static bypass.

C.

The UPS system's response will vary depending on the rate of electrical load growth.

D.

The UPS system will continue to support the load and become a capacity configuration.

Full Access
Question # 17

Which statement describes the term "saturation point"?

A.

When air reaches 100% relative humidity

B.

When air temperature exceeds 80 F (27C)

C.

When water appears on the data center floor

D.

When the air's dew point is twice the temperature

Full Access
Question # 18

What is a common limiting factor when specifying a 48U rack / enclosure?

A.

Ceiling height

B.

Cable capacity

C.

Cooling requirements

D.

Enclosure door clearance

Full Access
Question # 19

What is the main advantage of using a wider than standard enclosure (over 600 mm)?

A.

Supports more servers

B.

Provides additional U space

C.

Increases space for network cabling

D.

Improves strength for seismic applications

Full Access
Question # 20

What is a measure of heat intensity?

A.

Volume

B.

Humidity

C.

Pressure

D.

Temperature

Full Access
Question # 21

Which method of heat transfer occurs when stepping barefoot onto hot pavement?

A.

Radiation

B.

Convection

C.

Conduction

D.

Evaporation

Full Access
Question # 22

Click the Exhibit button.

This picture illustrates which type of cooling architecture?

A.

Hybrid

B.

Row

C.

Rack

D.

Room

Full Access
Question # 23

Which three factors should be considered when evaluating physical security systems? (Choose

three.)

A.

VESD protocols

B.

User friendliness

C.

Cost of equipment

D.

Color of security hardware components

E.

Likelihood of locking out legitimate users

Full Access
Question # 24

Which UPS topology switches to batteries and turns on the inverter when the utility fails?

A.

Rotary

B.

Standby

C.

Delta conversion

D.

Double conversion

Full Access
Question # 25

Which UPS configuration has the highest availability?

A.

Capacity

B.

Parallel redundant

C.

Isolated redundant

D.

Distributed redundant

Full Access
Question # 26

What are three data center attributes that impact the selection of a fire protection system? (Choose three.)

A.

The presence of a raised floor

B.

Number of air changes per hour

C.

The rated capacity of the UPS system

D.

The number of double insulated windows

E.

Proximity of the data center to other buildings

Full Access
Question # 27

Which method transfers heat by electromagnetic waves?

A.

Radiation

B.

Convection

C.

Conduction

D.

Evaporation

Full Access
Question # 28

Which standard was written for the protection of computer or data processing equipment?

A.

NFPA 71

B.

NFPA 72

C.

NFPA 74

D.

NFPA 75

Full Access
Question # 29

Which type of humidification system uses quartz lamps extended over an open pool of water to release water vapor?

A.

Infrared humidifier

B.

Ultrasonic humidifier

C.

Electromagnetic humidifier

D.

Steam canister humidifier

Full Access
Question # 30

What are three benefits of Inergen? (Choose three.)

A.

It is non-conductive.

B.

It has zero ozone depletion potential.

C.

It has a low pressure delivery system.

D.

It requires less storage tanks than Halon.

E.

It is safe to discharge in an occupied area.

Full Access
Question # 31

What two characteristics can result in poor performance of network cables? (Choose two.)

A.

Tie wraps that are too tight

B.

Vertical cable management

C.

A bend radius that is too small

D.

An overhead deployment with cables run in troughs

Full Access
Question # 32

Which benefit is provided when air distribution methods return the warmest air to the CRAC units?

A.

Decreased heat load in the data center

B.

Increased capacity of the cooling system

C.

Maximized mixing of supply and return air

D.

Elimination of resistance created by underfloor cables

Full Access
Question # 33

Which three access control methods are examples of "what you have"? (Choose three.)

A.

Fingerprint

B.

Smart card

C.

Badge with photo

D.

Badge with bar code

E.

Personal identification number

Full Access
Question # 34

What are the three basic physical security categories that describe technologies for personnel identification? (Choose three.)

A.

Who you are

B.

Where you are

C.

What you have

D.

Who you know

E.

What you know

Full Access
Question # 35

Which of the following is an example of equipment that would be monitored by a building management system (BMS) ?

A.

A network router

B.

A telephone switch

C.

A data center server

D.

A comfort-air conditioning system

Full Access
Question # 36

Data cabling infrastructure consists of which broad categories of cable?

A.

Data cables and power cables

B.

Fiber cables and copper cables

C.

Solid cables and stranded cables

D.

Category (CAT) 5 cables and category (CAT) 6 cables

Full Access
Question # 37

Which statement describes a difference between fiber and copper cabling?

A.

Copper is generally less expensive than fiber for long runs.

B.

Copper is generally less expensive than fiber for short runs.

C.

Signals can be transmitted longer distances over copper than multi-mode fiber.

D.

Signals can be transmitted longer distances over copper than single-mode fiber.

Full Access
Question # 38

A previously built data center inherited the existing wet pipe sprinkler system. There are smoke detectors in the data center and the local authority having code jurisdiction mandates a sprinkler system in the data center.

How can you further protect the data center's IT equipment while meeting the mandated requirements?

A.

Replace the wet-pipe sprinkler system with a FM-200 system.

B.

Replace the wet-pipe sprinkler system with a pre-action system.

C.

Install linear heat detectors along the cable trays in addition to the existing sprinkler system.

D.

Install heat detectors next to each of the sprinkler heads and then connect them to the fire control panel.

Full Access
Question # 39

Fluid coolers and pump packages are components of which heat rejection system?

A.

Chilled water system

B.

Water cooled system

C.

Glycol cooled system

D.

Air cooled self-contained system

Full Access
Question # 40

Which statement describes biometrics?

A.

The design of ergonomic factors that affect data center efficiency

B.

Data trending and analysis of the traffic passing a security check point

C.

Access control based on a unique physical characteristic of an individual

D.

Monitoring of environmental factors, such as heat and humidity, that affect data center personnel

Full Access
Question # 41

The outlet of a perimeter CRAC unit is connected to duct work which feeds conditioned air to the aisle above the front of the IT equipment racks. No other air management devices are present in the space.

This is an example of which type of air distribution system?

A.

Flooded supply, flooded return

B.

Flooded supply, fully ducted return

C.

Flooded supply, locally ducted return

D.

Locally ducted supply, flooded return

Full Access
Question # 42

Click the Exhibit button.

Which type of power problem is illustrated in the exhibit?

A.

Harmonics

B.

Overvoltage

C.

Overcurrent

D.

Frequency variation

Full Access
Question # 43

Which NCPI management technique specifically addresses the challenge of maintaining spare equipment at compatible firmware revision levels to avoid downtime?

A.

Change management

B.

Capacity management

C.

Reliability management

D.

Availability management

Full Access
Question # 44

What are three core components of a standby generator? (Choose three.)

A.

Inverter

B.

Rectifier

C.

Governor

D.

Alternator

E.

Prime mover

Full Access
Question # 45

Which UPS configuration presents the fewest single points of failure?

A.

System + system

B.

Parallel redundant

C.

Isolated redundant

D.

Distributed redundant

Full Access
Question # 46

How do blanking panels improve cooling within an enclosure?

A.

By increasing the mixture of hot and cold air

B.

By increasing air intake through vented doors

C.

By directing exhaust heat into IT equipment intakes

D.

By limiting the recirculation of air into IT equipment

Full Access
Question # 47

Which statement illustrates a characteristic of nominal voltage?

A.

Nominal voltage is the voltage reference published by the power company.

B.

In most geographies, nominal voltage is fixed at either 380 V or 460 V.

C.

Nominal voltage is calculated based upon the load characteristics of the end user.

D.

Nominal voltage is the voltage that is supplied to the building and factors in power distribution losses.

Full Access
Question # 48

What is a result of an undervoltage condition?

A.

Transients

B.

Motors overheating

C.

Power distribution oversizing

D.

UPS frequency compensation

Full Access