2V0-41.24 Exam Dumps - VMware NSX 4.X Professional V2

The esxcli network firewall ruleset set -r syslog -e true command is used to enable the firewall ruleset for syslog on an ESXi host. Setting the -e flag to true allows syslog traffic through the ESXi firewall, enabling remote logging for syslog messages from the transport node.

To verify that VMware Identity Manager integration is successful with NSX, the administrator should check the NSX UI for the integration status. If it is configured correctly, the status should be marked as "Enabled," indicating that the integration is active and functioning.

NAT64 is supported on both Tier-0 and Tier-1 gateways, allowing for IPv6-to-IPv4 address translation at different gateway levels within NSX.

NAT64 requires the Tier-1 gateway to be configured in active-standby mode, as this configuration ensures stateful translation and consistency for IPv6-to-IPv4 traffic handling.

Switch Visualization in the NSX UI provides a clear mapping between virtual NICs (vNICs) and the physical adapters on the host. This feature allows administrators to see how virtual network interfaces connect to the underlying physical network infrastructure, which is essential for troubleshooting connectivity issues on transport nodes.

In NSX and VMware environments, an alarm in a suppressed state can typically be set to remain suppressed for a specific duration measured in hours. This allows administrators to temporarily ignore the alarm for a set period while working on a resolution without continuous alerts.

VMware recommends deploying a virtual NSX Edge Node using an ISO in either automated or interactive mode. This method provides flexibility and ensures that the NSX Edge node is deployed properly with all the necessary configurations. Using an ISO allows for a more streamlined and controlled deployment process, especially in larger environments.

The set auth-policy command in the NSX CLI is used to configure the authentication policy for local users. This command allows administrators to adjust settings related to password policies, lockout policies, and other authentication-related parameters for local user accounts on NSX Manager.

When a stateful service (such as NAT or firewall) is enabled for the first time on a Tier-0 Gateway, the Service Router (SR) is instantiated on the NSX Edge node and automatically connected with the Distributed Router (DR). This connection enables the Tier-0 Gateway to handle stateful services by routing traffic through the SR, which manages stateful packet processing, while the DR provides distributed routing functionality.