101-500 Exam Dumps - LPIC-1 Exam 101, Part 1 of 2, version 5.0

 The apt-get command upgrade will install the newest versions of all currently installed packages without removing any packages or installing new packages that are not already installed. It will only upgrade packages that can be upgraded without changing the dependencies1. The syntax is: apt-get upgrade. For example, apt-get upgrade nginx will update the nginx package to the latest version available in the repositories, if there is one2. The other options are not correct because:

auto-update is not a valid apt-get command.

dist-upgrade will also install new packages or remove existing packages if that is required to resolve a package conflict1. It is more aggressive than upgrade and may change the system in unexpected ways3.

install will install new packages or upgrade existing packages to the specified version1. It may also install or remove dependencies as needed4.

update will only resynchronize the package index files from the sources, but it will not install or upgrade any packages1. References:

apt-get(8) — apt — Debian buster — Debian Manpages

How to Update Nginx on Ubuntu 18.04 | Linuxize

What is “dist-upgrade” and why does it upgrade more than “upgrade”? - Ask Ubuntu

How to Install Specific Version of Package using apt-get - TecAdmin

The command that will reduce all consecutive spaces down to a single space is tr -s ’ ’ < a.txt > b.txt. This command uses the following options and syntax:

-s: Squeezes repeated characters listed in the first set with single occurrence.

’ ': Specifies a space character as the first set.

< a.txt: Redirects the input from a file named a.txt.

b.txt: Redirects the output to a file named b.txt.

The output of this command will be a new file called b.txt that contains the same text as a.txt, except that any sequence of multiple spaces will be replaced by a single space. For example, if the file a.txt contains the following text:

This is a text file with multiple spaces.

The file b.txt will contain the following text:

This is a text file with multiple spaces.

The other commands are incorrect for the following reasons:

A. tr ‘\s’ ’ ’ < a.txt > b.txt: This command will replace every whitespace character (\s) with a space character, which will not reduce the number of spaces, but rather convert tabs and newlines into spaces.

B. tr -c ’ ’ < a.txt > b.txt: This command will complement the first set, meaning that it will apply the operation to all characters that are not spaces. This will not affect the spaces at all, but rather squeeze all other characters.

C. tr -d ’ ’ < a.txt > b.txt: This command will delete all spaces from the input, which will not reduce them to a single space, but rather remove them completely.

D. tr -r ’ ’ ‘\n’ < a.txt > b.txt: This command will replace all spaces with newlines, which will not reduce the spaces, but rather create a new line for each word.

The ? symbol within regular expressions represents an optional match of the preceding qualifier. A qualifier is a character or a group of characters that can be repeated a certain number of times, such as , +, ?, {n}, {n,}, or {n,m}. The ? symbol means that the qualifier can occur zero or one times, but not more. For example, the regular expression colou?r matches both “color” and “colour”, but not “colouur” or “colr”. The ? symbol can also be used to make other qualifiers lazy, meaning that they will match the smallest possible number of characters, instead of the largest (greedy). For example, the regular expression a.?b matches the shortest string that starts with “a” and ends with “b”, such as “ab” or “a-b”, but not “a-b-c”. References:

[LPI Exam 101 Detailed Objectives], Topic 103: GNU and Unix Commands, Objective 103.7: Perform basic file management, Weight: 4, Key Knowledge Areas: Use of egrep to search for extended regular expressions in text output.

[Regular expression syntax cheat sheet], Topic: Quantifiers.

In Bash, inserting 1>&2 after a command redirects standard output to standard error. This means that the output of the command that normally goes to the standard output stream (file descriptor 1) will be sent to the standard error stream (file descriptor 2) instead. This can be useful if we want to capture or discard both the normal output and the error output of a command. For example, if we want to run a command and send both its output and error to /dev/null (a special device that discards any data written to it), we can use:

command > /dev/null 1>&2

This will redirect the standard output of command to /dev/null, and then redirect the standard error of command to the same place as the standard output, which is /dev/null. The other options are not correct because:

A. standard error to standard input: This is not possible, because standard input is a read-only stream, and we cannot redirect output to it.

B. standard input to standard error: This is not what 1>&2 does, because 1 refers to standard output, not standard input. To redirect standard input to standard error, we would need to use 0>&2, where 0 refers to standard input.

D. standard error to standard output: This is not what 1>&2 does, because it would require the opposite order of file descriptors: 2>&1. This would redirect standard error to standard output, not the other way around.

E. standard output to standard input: This is not possible, for the same reason as option A. References:

Bash redirections cheat sheet

How to redirect stderr to a file - Linuxize

 The Logical Volume Manager (LVM) is a tool that allows the creation and management of logical volumes on Linux systems. Logical volumes are partitions that can span multiple physical disks and can be resized or deleted without affecting the rest of the system. Some of the benefits of using LVM are:

To dynamically change the size of logical volumes. LVM allows the user to increase or decrease the size of a logical volume without having to repartition the disk or reboot the system. This can be useful for allocating more space to a volume that is running out of space, or freeing up space from a volume that is not needed anymore.

To create snapshots. LVM allows the user to create a snapshot of a logical volume, which is a copy of the volume at a certain point in time. Snapshots can be used for backup purposes, as they can be restored to the original volume if needed. Snapshots can also be used for testing purposes, as they can be mounted as read-only or read-write volumes without affecting the original volume.

To dynamically create or delete logical volumes. LVM allows the user to create or delete logical volumes on the fly, without having to repartition the disk or reboot the system. This can be useful for creating temporary volumes for specific purposes, or deleting volumes that are no longer needed.

LVM cannot be used for the following purposes:

To create RAID 9 arrays. RAID 9 is not a valid RAID level, and LVM does not support RAID functionality. RAID is a technique that uses multiple disks to provide redundancy, performance, or both. RAID can be implemented at the hardware level, by using a RAID controller, or at the software level, by using tools such as mdadm or dmraid. LVM can work on top of RAID devices, but it cannot create them.

To encrypt logical volumes. LVM does not provide encryption functionality. Encryption is a technique that protects data from unauthorized access by using a secret key to transform the data into an unreadable form. Encryption can be implemented at the disk level, by using tools such as dm-crypt or LUKS, or at the file system level, by using tools such as eCryptfs or EncFS. LVM can work on top of encrypted devices, but it cannot encrypt them.

 The command foo 1> bar redirects the standard output (stdout) from the command foo to the file bar, overwriting the existing contents of the file. The number 1 before the redirection operator > indicates the file descriptor of the stdout stream, which is 1 by default. The redirection operator > means that the output of the command is written to the file, replacing any previous data in the file. The file name after the redirection operator is the destination of the output. For example, if the command foo prints “Hello world” to the stdout, and the file bar contains “Goodbye world”, the command foo 1> bar will write “Hello world” to the file bar, erasing “Goodbye world”. The other options are not correct because:

A. The stdout from the command foo is appended to the file bar: This is not what 1> does, because it overwrites the file, not appends to it. To append the output to the file, the operator >> should be used instead of >.

C. The command foo receives its stdin from the file bar: This is not what 1> does, because it redirects the output, not the input. To redirect the input from the file, the operator < should be used instead of >.

D. The command foo receives its stdin from the stdout of the command bar: This is not what 1> does, because it redirects the output to a file, not to another command. To redirect the output to another command, the operator | (pipe) should be used instead of >.

E. The stderr from the command foo is saved to the file bar: This is not what 1> does, because it redirects the stdout, not the stderr. To redirect the stderr, the file descriptor 2 should be used instead of 1.

The /tmp directory should be on a separate partition if possible because it is world writable. This means that any user can create, modify, or delete files and directories in /tmp. This can pose a risk of filling up the / partition, which can cause system instability or failure. By having /tmp on a separate partition, we can limit the amount of disk space that can be used by temporary files and prevent users from affecting the / partition. The /tmp directory is also a common target for malicious attacks, so having it on a separate partition can improve the security and isolation of the system. The /tmp directory is one of the few directories that are world writable by default, according to the Filesystem Hierarchy Standard (FHS)1. The other directories that are usually world writable are /var/tmp and /var/lock, which are also used for temporary or lock files. However, these directories are not as frequently used or as large as /tmp, so they are less likely to fill up the / partition. The /tmp directory also has the sticky bit set, which means that only the owner of a file or directory can delete or rename it2. This prevents users from deleting or modifying other users’ files in /tmp. However, this does not prevent users from creating new files or directories in /tmp, which can still consume disk space and resources. Therefore, it is advisable to have /tmp on a separate partition if possible. References:

Filesystem Hierarchy Standard

Sticky bit - Wikipedia